Custom Plastics #1 – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 2 closing every minute in numerical order.

For Example: Lots 1 and 2 will start to close at 10:00 AM, Lots 3 and 4 will start to close at 10:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
Two Lots Close Per Minute beginning on  Thursday, September 19th 2013 at 10:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
1 Lot of (10) Various Sized Bar Clamps, (2) 12" C-Clamps and (2) 10" C-Clamps
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 1

Description: Lot of (10) Various Sized Bar Clamps, (2) 12" C-Clamps and (2) 10" C-Clamps

Category:

2 Lot of (2) Ideal Pipe Benders, (1) Little Kicker 1/2" Offset Bender
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 2

Description: Lot of (2) Ideal Pipe Benders, (1) Little Kicker 1/2" Offset Bender

Category:

3 Predator 6500 Maximum Watt Generator, w/ 420 CC Gasoline Engine, (4) 120 Volt Outlets, (1) 120/240 Volt Outlet, (1) 12 Volt Outlet, Motor Vibration Pads, (Appears Never to have been put into use)
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 3

Description: Predator 6500 Maximum Watt Generator, w/ 420 CC Gasoline Engine, (4) 120 Volt Outlets, (1) 120/240 Volt Outlet, (1) 12 Volt Outlet, Motor Vibration Pads, (Appears Never to have been put into use)

Category:

4 Husky 1400 Watt Dual Halogen Worklights with Tripod
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 4

Description: Husky 1400 Watt Dual Halogen Worklights with Tripod

Category:

5 Husky 1400 Watt Dual Halogen Worklights with Tripod
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 5

Description: Husky 1400 Watt Dual Halogen Worklights with Tripod

Category:

6 Dual Light Approx. 1400 Watt Worklight with Tripod
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 6

Description: Dual Light Approx. 1400 Watt Worklight with Tripod

Category:

7 10-Ton Hydraulic Porta-Power w/ Extension Rods, Tritool, Handle, and Associated Feet & Case
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 7

Description: 10-Ton Hydraulic Porta-Power w/ Extension Rods, Tritool, Handle, and Associated Feet & Case

Category:

8 Dewalt 18 Volt Cordless Light Model DW919, (2) Dewalt 18 Volt Flashlights, and (1) 18 Volt Cordless Drill
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 8

Description: Dewalt 18 Volt Cordless Light Model DW919, (2) Dewalt 18 Volt Flashlights, and (1) 18 Volt Cordless Drill

Category:

9 Ace Digital Heat Gun Model 2195295, (1) 3M Scotchweld Polyurethane Reactive Adhesive Applicator
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 9

Description: Ace Digital Heat Gun Model 2195295, (1) 3M Scotchweld Polyurethane Reactive Adhesive Applicator

Category:

10 Prestone Jump It Portable Battery Jump Starter
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 10

Description: Prestone Jump It Portable Battery Jump Starter

Category:

11 Lot of (3) Caulk Guns, (1) Air Nozzle
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 11

Description: Lot of (3) Caulk Guns, (1) Air Nozzle

Category:

12 Lot of (5) Grease Guns, w/ (8) Tubes of Service Prolithium Grease
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 12

Description: Lot of (5) Grease Guns, w/ (8) Tubes of Service Prolithium Grease

Category:

13 Lot of (3) Custom Heavy Duty Steel Layout Tables, Approx. Length 8' x 30"
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 13

Description: Lot of (3) Custom Heavy Duty Steel Layout Tables, Approx. Length 8' x 30"

Category:

14 Approx. 20-Ton Hydraulic H Frame Press
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 14

Description: Approx. 20-Ton Hydraulic H Frame Press

Category:

15 Homelite 2700 PSI Gasoline Powered Power Washer w/ Associated Wand and (4) Nozzles, and Soap Applicator
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 15

Description: Homelite 2700 PSI Gasoline Powered Power Washer w/ Associated Wand and (4) Nozzles, and Soap Applicator

Category:

16 DeVilbiss Air Company 2000 PSI 6-HP Gasoline Powered Power Washer w/ Associated Spraying Wand
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 16

Description: DeVilbiss Air Company 2000 PSI 6-HP Gasoline Powered Power Washer w/ Associated Spraying Wand

Category:

17 Portable Gantry Crane, Approx. Length 10' x 12'. High, w/ (1) Budget 2-Ton Manual Chain Hoist, w/ (1) Budget 1-Ton Manual Chain Hoist, and Overhead Lighting
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 17

Description: Portable Gantry Crane, Approx. Length 10' x 12'. High, w/ (1) Budget 2-Ton Manual Chain Hoist, w/ (1) Budget 1-Ton Manual Chain Hoist, and Overhead Lighting

Category:

18 Baldor 1 1/2-HP Pedestal 6" Grinder, w/ 2" Sander Attachment
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 18

Description: Baldor 1 1/2-HP Pedestal 6" Grinder, w/ 2" Sander Attachment

Category:

19 Lima 3-HP Approx. 10" Double Ended Pedestal Grinder
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 19

Description: Lima 3-HP Approx. 10" Double Ended Pedestal Grinder

Category:

20 Shopco Continuous Blade Horizontal Metal Cutting Saw, w/ Material T Stand
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 20

Description: Shopco Continuous Blade Horizontal Metal Cutting Saw, w/ Material T Stand

Category:

21 Heavy Duty Steel Cable w/ 3/4-HP 6" Double Ended Grinder, (1) Machinists Benchtop Vice, and (1) Phase II Demagnetizer
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 21

Description: Heavy Duty Steel Cable w/ 3/4-HP 6" Double Ended Grinder, (1) Machinists Benchtop Vice, and (1) Phase II Demagnetizer

Category:

22 Lot of (2) Retractable Air Hose Reels, and (2) Retractable Electric Cord Reels
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 22

Description: Lot of (2) Retractable Air Hose Reels, and (2) Retractable Electric Cord Reels

Category:

23 DoAll Continuous Blade Vertical Band Saw, Model 1612-1, w/ DoAll Blade Welder Model DBW-1A, Blade Grinder, Adjustable Table, S/N 148-64785
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 23

Description: DoAll Continuous Blade Vertical Band Saw, Model 1612-1, w/ DoAll Blade Welder Model DBW-1A, Blade Grinder, Adjustable Table, S/N 148-64785

Category:

24 Chevalier Model FSG-618M Surface Grinder, w/ Newall Model DP7 Digital XY Readout with Pushpad Controls, Kanetsu 18" Magnetic Chuck, S/N A3818023
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 24

Description: Chevalier Model FSG-618M Surface Grinder, w/ Newall Model DP7 Digital XY Readout with Pushpad Controls, Kanetsu 18" Magnetic Chuck, S/N A3818023

Category:

25 Boyar-Schultz Surface Grinder, Model 612, w/ Walker Cermax 12" Magnetic Chuck, S/N 9808
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 25

Description: Boyar-Schultz Surface Grinder, Model 612, w/ Walker Cermax 12" Magnetic Chuck, S/N 9808

Category:

26 DoAll Abrasive Chop Off Saw, w/3-HP Baldor Motor, and Stand
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 26

Description: DoAll Abrasive Chop Off Saw, w/3-HP Baldor Motor, and Stand

Category:

27 Heavy Duty Materials Table, w/ Bar Stock
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 27

Description: Heavy Duty Materials Table, w/ Bar Stock

Category:

28 Bridgeport Series I 2-HP Vertical Boring Mill, w/ Mitutoyo Digital XY Read Out, 48" T-Slot Table, Bridgeport Power Slide, S/N 221331
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 28

Description: Bridgeport Series I 2-HP Vertical Boring Mill, w/ Mitutoyo Digital XY Read Out, 48" T-Slot Table, Bridgeport Power Slide, S/N 221331

Category:

29 Pro-Source 8" Pedestal Drill Press
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 29

Description: Pro-Source 8" Pedestal Drill Press

Category:

30 Milwaukee Magnetic Based Drill Press, w/ Gameg Flector - Magnetic Adjustable Drill Base
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 30

Description: Milwaukee Magnetic Based Drill Press, w/ Gameg Flector - Magnetic Adjustable Drill Base

Category:

31 6" Machinists Vice
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 31

Description: 6" Machinists Vice

Category:

32 Lot of (21) R8 Collets
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 32

Description: Lot of (21) R8 Collets

Category:

33 Cummins Tap & Die Set
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 33

Description: Cummins Tap & Die Set

Category:

34 Raytek Ranger ST Digital Handheld Thermometer Model 9RD24, (1) Plastic Process Equipment Model 39668-K Thermometer w/ Associated Probes
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 34

Description: Raytek Ranger ST Digital Handheld Thermometer Model 9RD24, (1) Plastic Process Equipment Model 39668-K Thermometer w/ Associated Probes

Category:

35 Extech EZ View 11A Type K Digital Thermometer, and (1) Extech IR470 True RMS Multimeter
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 35

Description: Extech EZ View 11A Type K Digital Thermometer, and (1) Extech IR470 True RMS Multimeter

Category:

36 5C Collet Block Set, and (1) 1-2-3 Block Set
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 36

Description: 5C Collet Block Set, and (1) 1-2-3 Block Set

Category:

37 Gate Cutters, New and Used
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 37

Description: Gate Cutters, New and Used

Category:

38 Lot of (2) Pipe Wrenches, (1) PVC Cutter, and (1) Wrench
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 38

Description: Lot of (2) Pipe Wrenches, (1) PVC Cutter, and (1) Wrench

Category:

39 Lot of (7) Wrenches, Size Range from 2" to 15/16
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 39

Description: Lot of (7) Wrenches, Size Range from 2" to 15/16

Category:

40 3300-Lb. Capacity Scissor Mold Lifter
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 40

Description: 3300-Lb. Capacity Scissor Mold Lifter

Category:

41 Lot of (2) Milwaukee 1/2" Electric Drills, and (1) Craftsman Finishing Palm Sander
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 41

Description: Lot of (2) Milwaukee 1/2" Electric Drills, and (1) Craftsman Finishing Palm Sander

Category:

42 Lot of (4) Multiton Machine Moving Skates, w/ Handle
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 42

Description: Lot of (4) Multiton Machine Moving Skates, w/ Handle

Category:

43 8' x 6' Heavy Duty Steel Lay Out / Welding Table
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 43

Description: 8' x 6' Heavy Duty Steel Lay Out / Welding Table

Category:

44 48" x 30" Heavy Duty Steel Lay Out Table
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 44

Description: 48" x 30" Heavy Duty Steel Lay Out Table

Category:

45 Branson Sonic Welder Model 8600, Series 800, S/N WD10119N
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 45

Description: Branson Sonic Welder Model 8600, Series 800, S/N WD10119N

Category:

46 Clausing Colchester 15" Precision Lathe, w/ 12" 4-Jaw Chuck, 8" 3-Jaw Chuck, Tool Post Holder, Center Rest, Approx. 70" Bed, Adjustable Speed, (S/N unavailable)
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 46

Description: Clausing Colchester 15" Precision Lathe, w/ 12" 4-Jaw Chuck, 8" 3-Jaw Chuck, Tool Post Holder, Center Rest, Approx. 70" Bed, Adjustable Speed, (S/N unavailable)

Category:

47 36" Pedestal Shop Fan
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 47

Description: 36" Pedestal Shop Fan

Category:

48 Safety Kleen Model 30.3R Solvent Parts Washer
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 48

Description: Safety Kleen Model 30.3R Solvent Parts Washer

Category:

49 Lot of (2) 2-Door Metal Cabinets, w/ Contents, Contents Include but are not limited to: Hand Tools, Scrub Pads, Grease, Drill Bits, Electrical Cord, Numerous Other Machine Shop Items, Please inspect
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 49

Description: Lot of (2) 2-Door Metal Cabinets, w/ Contents, Contents Include but are not limited to: Hand Tools, Scrub Pads, Grease, Drill Bits, Electrical Cord, Numerous Other Machine Shop Items, Please inspect

Category:

50 2006 Fadal Model VMC 6030 HT CNC Machining Center, w/ 20-Tool Changing Carousel, 10,000RPM Head, 57" x 30" T-Slot Table, Fadal CNC 32MP Digital Controls, Approx. 33 CAT 40 Tool Holders, (1) CAT Tool Changing Fixture, (1) Approx. 30" x 30" Maple Top Work Bench, w/ Associated Manuals, S/N 012006109269
Sold at Custom Plastics #1 on 9/19/2013
Kenton, OH

Lot Number: 50

Description: 2006 Fadal Model VMC 6030 HT CNC Machining Center, w/ 20-Tool Changing Carousel, 10,000RPM Head, 57" x 30" T-Slot Table, Fadal CNC 32MP Digital Controls, Approx. 33 CAT 40 Tool Holders, (1) CAT Tool Changing Fixture, (1) Approx. 30" x 30" Maple Top Work Bench, w/ Associated Manuals, S/N 012006109269

Category:

 
Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577