DVG – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 2 closing every minute in numerical order.

For Example: Lots 1 and 2 will start to close at 10:00 AM, Lots 3 and 4 will start to close at 10:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
Two Lots Close Per Minute beginning on  Wednesday, November 19th 2014 at 10:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
201 6" 3-Jaw Chuck
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 201

Description: 6" 3-Jaw Chuck

Category:

202 6" 3-Jaw Chuck
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 202

Description: 6" 3-Jaw Chuck

Category:

203 4" 3-Jaw Chuck w/ Spare Jaws
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 203

Description: 4" 3-Jaw Chuck w/ Spare Jaws

Category:

204 Approximately 60" x 36" Adjustable Height Epoxy Top Workbench w/ Lower Cabinetry, (1) 48" x 24" Printer Stand, (1) Adjustable Swivel-Based Office Chair, (1) Stationary Chair
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 204

Description: Approximately 60" x 36" Adjustable Height Epoxy Top Workbench w/ Lower Cabinetry, (1) 48" x 24" Printer Stand, (1) Adjustable Swivel-Based Office Chair, (1) Stationary Chair

Category:

205 Dell 17" Flat Panel Monitor, (1) Chimei Model CMV-938D 19" Flat Panel Monitor
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 205

Description: Dell 17" Flat Panel Monitor, (1) Chimei Model CMV-938D 19" Flat Panel Monitor

Category:

206 Dell Model 1320C Color Laser Printer, Not Working
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 206

Description: Dell Model 1320C Color Laser Printer, Not Working

Category:

207 Justrite Model 25545 2-Door Flammable Storage Cabinet, 2-45-Gallon Capacity
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 207

Description: Justrite Model 25545 2-Door Flammable Storage Cabinet, 2-45-Gallon Capacity

Category:

208 Approximately 48" x 48" Heavy Duty Metal Top Workbench w/ (1) Wilton 4" Bench Vise and (1) Arbor Press
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 208

Description: Approximately 48" x 48" Heavy Duty Metal Top Workbench w/ (1) Wilton 4" Bench Vise and (1) Arbor Press

Category:

209 SMC 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 209

Description: SMC 30" Pedestal Mounted Fan

Category:

210 Karcher Model K5-93 Electric Portable Power Washer
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 210

Description: Karcher Model K5-93 Electric Portable Power Washer

Category:

210A Gray Mills Model PL36-A 36" Parts Washing Station
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 210A

Description: Gray Mills Model PL36-A 36" Parts Washing Station

Category:

211 Chicago Electric Power Tools Model 94702 Parts Washer, 20-Gallon
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 211

Description: Chicago Electric Power Tools Model 94702 Parts Washer, 20-Gallon

Category:

212 Wel-Bilt Model 141226 Mobile Parts Washer w/ Castered Base
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 212

Description: Wel-Bilt Model 141226 Mobile Parts Washer w/ Castered Base

Category:

213 2007 Flow International CNC Water Jet Cutting Machine Model 713633-1, 6' x 12' work capacity, S/N 389086/ FC-109-1EU, 480 Volts, 3-Phase, 60-Hz, Complete w/ Computer Controls, Computer Workstation, Abrasive Additive Tank, w/ Spare High Pressure Flow Head, Calibration Cylinders and Assorted Spare Parts, Approx # of Hours 2,989, 50 hp intensifier pump 60,000 psi
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 213

Description: 2007 Flow International CNC Water Jet Cutting Machine Model 713633-1, 6' x 12' work capacity, S/N 389086/ FC-109-1EU, 480 Volts, 3-Phase, 60-Hz, Complete w/ Computer Controls, Computer Workstation, Abrasive Additive Tank, w/ Spare High Pressure Flow Head, Calibration Cylinders and Assorted Spare Parts, Approx # of Hours 2,989, 50 hp intensifier pump 60,000 psi

Category:

214 Industrial Magnetics Inc. Mag-Mate Permanent Magnetic Plate Lifting Magnet, 1000-Lb Max Capacity
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 214

Description: Industrial Magnetics Inc. Mag-Mate Permanent Magnetic Plate Lifting Magnet, 1000-Lb Max Capacity

Category:

215 Industrial Magnetics Inc. Mag-Mate Permanent Magnetic Plate Lifting Magnet, 1000-Lb Max Capacity
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 215

Description: Industrial Magnetics Inc. Mag-Mate Permanent Magnetic Plate Lifting Magnet, 1000-Lb Max Capacity

Category:

216 Industrial Magnetics Inc. Mag-Mate Permanent Magnetic Plate Lifting Magnet, 1000-Lb Max Capacity
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 216

Description: Industrial Magnetics Inc. Mag-Mate Permanent Magnetic Plate Lifting Magnet, 1000-Lb Max Capacity

Category:

217 Industrial Magnetics Inc. Mag-Mate Permanent Magnetic Plate Lifting Magnet, 1000-Lb Max Capacity
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 217

Description: Industrial Magnetics Inc. Mag-Mate Permanent Magnetic Plate Lifting Magnet, 1000-Lb Max Capacity

Category:

218 Vestil Forklift Mountable Lifting Clevis w/ (2) Lifting Bridles
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 218

Description: Vestil Forklift Mountable Lifting Clevis w/ (2) Lifting Bridles

Category:

219 Rubbermaid 4-Tier, 4-Wheel Rollaround Cart, 72" x 36" Workbench, (1) 48" x 30" Workbench, (2) Welding Curtains
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 219

Description: Rubbermaid 4-Tier, 4-Wheel Rollaround Cart, 72" x 36" Workbench, (1) 48" x 30" Workbench, (2) Welding Curtains

Category:

220 Lot of (3) Skids of Various Sized Plating, Various Sizes, Various Thicknesses and Various Metal Types, Please Note Plates May Have Been Cut Into Already, Please Inspect
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 220

Description: Lot of (3) Skids of Various Sized Plating, Various Sizes, Various Thicknesses and Various Metal Types, Please Note Plates May Have Been Cut Into Already, Please Inspect

Category:

221 Lot of (7) Skids of Various Steel Plate, Ballistic Plating, Stainless Plate, Aluminum and Assorted Poly Sheeting, Various Sizes, Most Sheets Cut Into Previously, Please Inspect
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 221

Description: Lot of (7) Skids of Various Steel Plate, Ballistic Plating, Stainless Plate, Aluminum and Assorted Poly Sheeting, Various Sizes, Most Sheets Cut Into Previously, Please Inspect

Category:

222 Various Aluminum Stainless Steel and Steel Plating, Sizes and Thicknesses Vary, Most Plates Have Been Cut Into, Please Inspect, (2) 4-Position Stand-up Racks
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 222

Description: Various Aluminum Stainless Steel and Steel Plating, Sizes and Thicknesses Vary, Most Plates Have Been Cut Into, Please Inspect, (2) 4-Position Stand-up Racks

Category:

223 Hyd-Mech Series 3 Model S-20M Horizontal Band Saw, 24" Max Capacity w/ Associated Controls, Cutting Coolant System w/ Recirculation Filter and Pump, Programmable Infeed Unit and Associated Guide, S/N DA0307347, 240 Volts, 3-Phase, 60-Hz, 1024 Amp, (1) Approximately 10' Section of Hytrol 24" Roller Conveyor
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 223

Description: Hyd-Mech Series 3 Model S-20M Horizontal Band Saw, 24" Max Capacity w/ Associated Controls, Cutting Coolant System w/ Recirculation Filter and Pump, Programmable Infeed Unit and Associated Guide, S/N DA0307347, 240 Volts, 3-Phase, 60-Hz, 1024 Amp, (1) Approximately 10' Section of Hytrol 24" Roller Conveyor

Category:

223a 1994 Metlsaw CNC 12' Horizontal Metal Cutting Saw, 8" Capacity, Model NF-1214-78, S/N 243; Dustkop 4-Bag Chip Collector, Please Note - This Lot is Located at 7280 Baltimore Annapolis Blvd, Glen Burnie, MD 21061
Sold at DVG on 11/19/2014
Glen Burnie, MD

Lot Number: 223a

Description: 1994 Metlsaw CNC 12' Horizontal Metal Cutting Saw, 8" Capacity, Model NF-1214-78, S/N 243; Dustkop 4-Bag Chip Collector, Please Note - This Lot is Located at 7280 Baltimore Annapolis Blvd, Glen Burnie, MD 21061

Category:

224 Lot of (2) 2-Door Metal Storage Cabinets, (1) 5-Tier, 4-Wheel Rollaround Cart
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 224

Description: Lot of (2) 2-Door Metal Storage Cabinets, (1) 5-Tier, 4-Wheel Rollaround Cart

Category:

225 Miscellaneous Stock Contents of (2) Cantilever Racks Including But Not Limited To Various Pipe Stock, Round Stock, Tubing, Square Stock, Rectangle Stock, Various Plate Steel, Various Lengths, Sizes and Thicknesses, Some Have Been Cut Into, Please Inspect
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 225

Description: Miscellaneous Stock Contents of (2) Cantilever Racks Including But Not Limited To Various Pipe Stock, Round Stock, Tubing, Square Stock, Rectangle Stock, Various Plate Steel, Various Lengths, Sizes and Thicknesses, Some Have Been Cut Into, Please Inspect

Category:

226 Lot of (2) Sections of 4-Tier Medium Duty Cantilever Racking w/ (3) Uprights, Associated Cross Members
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 226

Description: Lot of (2) Sections of 4-Tier Medium Duty Cantilever Racking w/ (3) Uprights, Associated Cross Members

Category:

227 Lot of (2) Sections of 4-Tier Medium Duty Cantilever Racking w/ (3) Uprights, Associated Cross Members
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 227

Description: Lot of (2) Sections of 4-Tier Medium Duty Cantilever Racking w/ (3) Uprights, Associated Cross Members

Category:

228 Meeco Model SSM4-5 Portable Rack System, 7500-Lb Capacity and Contents Including But Not Limited To Various Round Stock, Octagonal Stock, Tubing, Angle Stock and Square Stock
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 228

Description: Meeco Model SSM4-5 Portable Rack System, 7500-Lb Capacity and Contents Including But Not Limited To Various Round Stock, Octagonal Stock, Tubing, Angle Stock and Square Stock

Category:

229 Flow Pro 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 229

Description: Flow Pro 30" Pedestal Mounted Fan

Category:

230 SMC 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 230

Description: SMC 30" Pedestal Mounted Fan

Category:

231 SMC 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 231

Description: SMC 30" Pedestal Mounted Fan

Category:

232 SMC 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 232

Description: SMC 30" Pedestal Mounted Fan

Category:

233 Flow Pro 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 233

Description: Flow Pro 30" Pedestal Mounted Fan

Category:

234 SMC 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 234

Description: SMC 30" Pedestal Mounted Fan

Category:

235 SMC 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 235

Description: SMC 30" Pedestal Mounted Fan

Category:

236 Flow Pro 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 236

Description: Flow Pro 30" Pedestal Mounted Fan

Category:

237 SMC 30" Pedestal Mounted Fan
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 237

Description: SMC 30" Pedestal Mounted Fan

Category:

238 Lot of (4) 2-Tier, 4-Wheel Rollaround Carts and Various Welding Curtain
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 238

Description: Lot of (4) 2-Tier, 4-Wheel Rollaround Carts and Various Welding Curtain

Category:

239 2007 Almi Model AL150 Pedestal Mounted Belt Sander, 150 MM/6", 230 Volts, 3-Phase, 50/60-Hz, S/N 100912 w/ Associated Clamp and XY Access Feed System
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 239

Description: 2007 Almi Model AL150 Pedestal Mounted Belt Sander, 150 MM/6", 230 Volts, 3-Phase, 50/60-Hz, S/N 100912 w/ Associated Clamp and XY Access Feed System

Category:

240 National Model NA216 48" Foot Pedal Operated Shear w/ Associated Back Gauge and Guides, Max Thickness 16-Gauge, S/N 215-706
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 240

Description: National Model NA216 48" Foot Pedal Operated Shear w/ Associated Back Gauge and Guides, Max Thickness 16-Gauge, S/N 215-706

Category:

241 Verson 90 Ton Press 84 x 20" Bolster Plate 12.25" shut height, 3" stroke, 5" ram adjustment sn 19383-306-90 with Metal Tech Controls
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 241

Description: Verson 90 Ton Press 84 x 20" Bolster Plate 12.25" shut height, 3" stroke, 5" ram adjustment sn 19383-306-90 with Metal Tech Controls

Category:

242 Clausing 4-Head Drill Press w/ (2) Clausing Model 1687 Variable Speed Drill Presses, Speeds Range From 330 to 4000 RPM's and (2) Clausing Model 1666 Variable Drill Press Heads, Speeds Range 330 RPM's to 4000 RPM's w/ 60" x 20" Work Table w/ Lubricant Catch Trough, (1) 6" Milling Vice
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 242

Description: Clausing 4-Head Drill Press w/ (2) Clausing Model 1687 Variable Speed Drill Presses, Speeds Range From 330 to 4000 RPM's and (2) Clausing Model 1666 Variable Drill Press Heads, Speeds Range 330 RPM's to 4000 RPM's w/ 60" x 20" Work Table w/ Lubricant Catch Trough, (1) 6" Milling Vice

Category:

243 Central Hydraulics Model 32879 20-Ton H-Press
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 243

Description: Central Hydraulics Model 32879 20-Ton H-Press

Category:

244 2006 Conquest Model DG201 20" Disc Sander w/ 27" T- Saw Table, S/N 2010007, 110 Volts, 125-Hp
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 244

Description: 2006 Conquest Model DG201 20" Disc Sander w/ 27" T- Saw Table, S/N 2010007, 110 Volts, 125-Hp

Category:

245 2007 Vaileigh Industries Model SI-5216 48" Foot Pedal Operated Shear, S/N C31173, Complete w/ Associated Back Gauge and Guide Rails
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 245

Description: 2007 Vaileigh Industries Model SI-5216 48" Foot Pedal Operated Shear, S/N C31173, Complete w/ Associated Back Gauge and Guide Rails

Category:

246 DoAll Model 36-2 Variable Speed Band Saw, 460 Volts, 3-Phase, 60-Hz, S/N 52-55316, Speed Ranges from 40' Per Minute to 15,000' Per Minute w/ (1) Do All Model DDW-1A Blade Welder, 220 Volts, Single Phase, 60-Hz, S/N 5518934
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 246

Description: DoAll Model 36-2 Variable Speed Band Saw, 460 Volts, 3-Phase, 60-Hz, S/N 52-55316, Speed Ranges from 40' Per Minute to 15,000' Per Minute w/ (1) Do All Model DDW-1A Blade Welder, 220 Volts, Single Phase, 60-Hz, S/N 5518934

Category:

247 Chicago Model 612-6, 72" Manual Finger Brake w/ Associated Fingers and Tooling
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 247

Description: Chicago Model 612-6, 72" Manual Finger Brake w/ Associated Fingers and Tooling

Category:

248 National Sheet Metal Model U4812 48" Finger Brake w/ Associated Fingers, Max 12-Gauge, S/N 124-906
Sold at DVG on 11/19/2014
Fort Mill, SC

Lot Number: 248

Description: National Sheet Metal Model U4812 48" Finger Brake w/ Associated Fingers, Max 12-Gauge, S/N 124-906

Category:

 
Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577