|
150
|
|
Rockwell Delta 4-Head Drill Press Complete w/ (1) Rockwell Delta Model 17600 Drill Press Head, (3) Walker Turner Drill Press Heads Each w/ (1) Jacobs Model 18 Superchuck, 1/8 - 3/4" Cap., Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
150
Description:
Rockwell Delta 4-Head Drill Press Complete w/ (1) Rockwell Delta Model 17600 Drill Press Head, (3) Walker Turner Drill Press Heads Each w/ (1) Jacobs Model 18 Superchuck, 1/8 - 3/4" Cap., Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
151
|
|
Electro Arc Model 28 Metal Disintegrator, 220 Volts, Single Phase, 60 Hz w/ (1) Electro Arc Model L8H Disintegration Head
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
151
Description:
Electro Arc Model 28 Metal Disintegrator, 220 Volts, Single Phase, 60 Hz w/ (1) Electro Arc Model L8H Disintegration Head
Category:
|
|
152
|
|
Lot of (10) 3-Tier 4-wheel roll Around Metal Carts
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
152
Description:
Lot of (10) 3-Tier 4-wheel roll Around Metal Carts
Category:
|
|
153
|
|
Van Dorner T-Slot Table Mountable Center Fixture w/ Tailstock Fixture
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
153
Description:
Van Dorner T-Slot Table Mountable Center Fixture w/ Tailstock Fixture
Category:
|
|
154
|
|
Black Diamond Model 2C 1/3 HP Precision Drill Bit Grinder
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
154
Description:
Black Diamond Model 2C 1/3 HP Precision Drill Bit Grinder
Category:
|
|
155
|
|
Large Lot of Various Sized Taps and Die - Set Incomplete, Please Inspect
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
155
Description:
Large Lot of Various Sized Taps and Die - Set Incomplete, Please Inspect
Category:
|
|
156
|
|
K.O. Lee Model B600 Pedestal Mounted Surface Grinder, s/n 1313 w/ Associated Tooling, Rigging Cost $100- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
156
Description:
K.O. Lee Model B600 Pedestal Mounted Surface Grinder, s/n 1313 w/ Associated Tooling, Rigging Cost $100- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
157
|
|
Black Diamond Model 2B Precision Drill Grinder w/ Lower Cabinet and Associated Grinding Wheels, Collets, Please Inspect
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
157
Description:
Black Diamond Model 2B Precision Drill Grinder w/ Lower Cabinet and Associated Grinding Wheels, Collets, Please Inspect
Category:
|
|
158
|
|
Delta Triple Duty Double Sided Pedestal Mounted Grinder Model AX-1245-R, 1/2 HP, 220 Volts, 3-Phase, 60 Hz
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
158
Description:
Delta Triple Duty Double Sided Pedestal Mounted Grinder Model AX-1245-R, 1/2 HP, 220 Volts, 3-Phase, 60 Hz
Category:
|
|
159
|
|
(4) Lot Boxes of Various Tooling Including Various Cutters, Reamers, End Mills, Counter Bores, Drill Bits, Etc, Please Inspect
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
159
Description:
(4) Lot Boxes of Various Tooling Including Various Cutters, Reamers, End Mills, Counter Bores, Drill Bits, Etc, Please Inspect
Category:
|
|
160
|
|
Box Lot of Various Sized Wrenches
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
160
Description:
Box Lot of Various Sized Wrenches
Category:
|
|
161
|
|
Box Lot of Various Sized Jacobs Super Chucks, Please Inspect, Sizes Vary
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
161
Description:
Box Lot of Various Sized Jacobs Super Chucks, Please Inspect, Sizes Vary
Category:
|
|
162
|
|
MMK Model HA6-8III 8" 3-Jaw Chuck, Buck 6" 3-Jaw Chuck, Lander 7/8" Landmation Tooling Fixture
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
162
Description:
MMK Model HA6-8III 8" 3-Jaw Chuck, Buck 6" 3-Jaw Chuck, Lander 7/8" Landmation Tooling Fixture
Category:
|
|
163
|
|
6" 3-Jaw Chuck, 6" 4-Jaw chuck, 4" 3-Jaw chuck
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
163
Description:
6" 3-Jaw Chuck, 6" 4-Jaw chuck, 4" 3-Jaw chuck
Category:
|
|
164
|
|
Lot Box of Various sized Jaws
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
164
Description:
Lot Box of Various sized Jaws
Category:
|
|
165
|
|
Lot of 40 Taper tooling w/ Various Sized cutters
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
165
Description:
Lot of 40 Taper tooling w/ Various Sized cutters
Category:
|
|
166
|
|
Lot of (2) 3-Tier 4-Wheel Roll Around Carts, (2) 2-Tier 4-Wheel Workbenches
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
166
Description:
Lot of (2) 3-Tier 4-Wheel Roll Around Carts, (2) 2-Tier 4-Wheel Workbenches
Category:
|
|
167
|
|
Craft Tools Model J Double Sided Polishing Unit w/ 3/4-HP Motor, 115 Volt, Single Phase, 60 Hz, s/n 60J4-5309L-5 67L w/ Built In Dust Collection System, Rigging Cost $100- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
167
Description:
Craft Tools Model J Double Sided Polishing Unit w/ 3/4-HP Motor, 115 Volt, Single Phase, 60 Hz, s/n 60J4-5309L-5 67L w/ Built In Dust Collection System, Rigging Cost $100- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
168
|
|
1" Belt Sander
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
168
Description:
1" Belt Sander
Category:
|
|
169
|
|
Air Hydraulics Adjustable Height Pneumatic Press w/ 3" Stroke and Associated Parts
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
169
Description:
Air Hydraulics Adjustable Height Pneumatic Press w/ 3" Stroke and Associated Parts
Category:
|
|
170
|
|
Harrison Model M250 Center Lathe w/ 36" Bed Length, Centerposts, Tail Stock, Speed Range 52 - 2000 RPM, 11" Swing, 208 Volts, 3-Phase, 60 Hz, Rigging Cost $150- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
170
Description:
Harrison Model M250 Center Lathe w/ 36" Bed Length, Centerposts, Tail Stock, Speed Range 52 - 2000 RPM, 11" Swing, 208 Volts, 3-Phase, 60 Hz, Rigging Cost $150- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
171
|
|
Sheldon Machine Model CM-46-P, 30" Bedway Speed Chucker Lathe w/ Pneumatically Driven 8-Position Turret Style Center Stock, Bijur Lubrication, s/n CM-27462, Rigging Cost $150- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
171
Description:
Sheldon Machine Model CM-46-P, 30" Bedway Speed Chucker Lathe w/ Pneumatically Driven 8-Position Turret Style Center Stock, Bijur Lubrication, s/n CM-27462, Rigging Cost $150- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
172
|
|
Unknown Mfg. Belt Driven Turret Lathe w/ Approx. 24" Bedway, 6-Position Turret, Associated Center Stock, s/n 59-17763, Rigging Cost $150- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
172
Description:
Unknown Mfg. Belt Driven Turret Lathe w/ Approx. 24" Bedway, 6-Position Turret, Associated Center Stock, s/n 59-17763, Rigging Cost $150- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
173
|
|
Raytech Industries Vibratory Shaker Style Cleaner, s/n 281 w/ Associated Cart and Media
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
173
Description:
Raytech Industries Vibratory Shaker Style Cleaner, s/n 281 w/ Associated Cart and Media
Category:
|
|
174
|
|
Lot of (7) 3-Tier 4-Wheel Roll Around Metal Carts
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
174
Description:
Lot of (7) 3-Tier 4-Wheel Roll Around Metal Carts
Category:
|
|
175
|
|
Lot of (13) Metal Workstools
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
175
Description:
Lot of (13) Metal Workstools
Category:
|
|
176
|
|
Lot of (9) 3-Tier 4-Wheel Roll Around Metal Carts
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
176
Description:
Lot of (9) 3-Tier 4-Wheel Roll Around Metal Carts
Category:
|
|
177
|
|
3-Tier 4-Wheel Roll Around Cart Complete w/ (2) 15" x 12" T-Slot Tables, Polisher
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
177
Description:
3-Tier 4-Wheel Roll Around Cart Complete w/ (2) 15" x 12" T-Slot Tables, Polisher
Category:
|
|
178
|
|
1" Belt Sander w/ Associated Cart
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
178
Description:
1" Belt Sander w/ Associated Cart
Category:
|
|
179
|
|
Pedestal Type Pneumatic Press w/ Associated 3-Tier 4-Wheel Roll Around Cart
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
179
Description:
Pedestal Type Pneumatic Press w/ Associated 3-Tier 4-Wheel Roll Around Cart
Category:
|
|
180
|
|
4-Wheel Roll Around Adjustable Height 30" x 36" Die Lift Table, 24" x 30" 4-Wheel Roll Around Metal Table, Dake Model 00 Arbor Press, 12" x 12" Metal Surface Plate, 18" x 12" Metal Surface Plate
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
180
Description:
4-Wheel Roll Around Adjustable Height 30" x 36" Die Lift Table, 24" x 30" 4-Wheel Roll Around Metal Table, Dake Model 00 Arbor Press, 12" x 12" Metal Surface Plate, 18" x 12" Metal Surface Plate
Category:
|
|
181
|
|
Bridgeport J1 Series Variable Speed Vertical Milling Machine, Speeds Range from 80 - 2720 RPM Complete w/ Approx. 42" x 9" Power Fed T-Slot Table, Bijur Lubrication, Associated Jacobs Chuck, s/n 64001, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
181
Description:
Bridgeport J1 Series Variable Speed Vertical Milling Machine, Speeds Range from 80 - 2720 RPM Complete w/ Approx. 42" x 9" Power Fed T-Slot Table, Bijur Lubrication, Associated Jacobs Chuck, s/n 64001, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
182
|
|
Blue M Power-O-Matic Series Electric Oven, Model POM-5863A, 120 Volt, Single Phase, 60 Hz, Max Temp 180 Degrees C, s/n PA-1245 w/ Associated Stand, Rigging Cost $175- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
182
Description:
Blue M Power-O-Matic Series Electric Oven, Model POM-5863A, 120 Volt, Single Phase, 60 Hz, Max Temp 180 Degrees C, s/n PA-1245 w/ Associated Stand, Rigging Cost $175- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
183
|
|
24" x 18" x 4" Granite Surface Plate w/ Associated Roll Around Cart
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
183
Description:
24" x 18" x 4" Granite Surface Plate w/ Associated Roll Around Cart
Category:
|
|
184
|
|
Walker Turner Model 1310-42 Pedestal Mounted Drill Press w/ Adjustable Height Table, s/n 0000069, Rigging Cost $150- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. EEmail: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
184
Description:
Walker Turner Model 1310-42 Pedestal Mounted Drill Press w/ Adjustable Height Table, s/n 0000069, Rigging Cost $150- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. EEmail: andy@pedowitz or aj@pedowitz.com
Category:
|
|
185
|
|
Bridgeport J1 Series Variable Speed Vertical Milling Machine, Speeds Range from 80 - 2720 RPM Complete w/ Approx. 42" x 9" Power Fed T-Slot Table, Bijur Lubrication, Associated Jacobs Chuck, s/n 67954 w/ Associated Fixture, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
185
Description:
Bridgeport J1 Series Variable Speed Vertical Milling Machine, Speeds Range from 80 - 2720 RPM Complete w/ Approx. 42" x 9" Power Fed T-Slot Table, Bijur Lubrication, Associated Jacobs Chuck, s/n 67954 w/ Associated Fixture, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
186
|
|
Bridgeport J1 Series Variable Speed Vertical Milling Machine, Speeds Range from 80 - 2720 RPM Complete w/ Approx. 42" x 9" Power Fed T-Slot Table, Bijur Lubrication, Associated Jacobs Chuck, s/n 88982, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
186
Description:
Bridgeport J1 Series Variable Speed Vertical Milling Machine, Speeds Range from 80 - 2720 RPM Complete w/ Approx. 42" x 9" Power Fed T-Slot Table, Bijur Lubrication, Associated Jacobs Chuck, s/n 88982, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
187
|
|
Bridgeport J1 Series Variable Speed Vertical Milling Machine, Speeds Range from 80 - 2720 RPM Complete w/ Approx. 42" x 9" Power Fed T-Slot Table, Bijur Lubrication, Associated Jacobs Chuck, s/n 54758, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
187
Description:
Bridgeport J1 Series Variable Speed Vertical Milling Machine, Speeds Range from 80 - 2720 RPM Complete w/ Approx. 42" x 9" Power Fed T-Slot Table, Bijur Lubrication, Associated Jacobs Chuck, s/n 54758, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
188
|
|
Bridgeport Variable Speed Milling Machine in Pieces Complete w/ Parts Located on 3-Tier 4-Wheel Roll Around Cart, (1) Bridgeport Shaping Attaching, Speeds Range from 70 RPM - 420 RPM, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
188
Description:
Bridgeport Variable Speed Milling Machine in Pieces Complete w/ Parts Located on 3-Tier 4-Wheel Roll Around Cart, (1) Bridgeport Shaping Attaching, Speeds Range from 70 RPM - 420 RPM, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
189
|
|
Hardinge Model AHC Super Precision Automatic Chucker Complete w/ 8-Position Automatic Chucking Turret, Associated Controls, 230 Volts, 3-Phase, 60 Hz, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
189
Description:
Hardinge Model AHC Super Precision Automatic Chucker Complete w/ 8-Position Automatic Chucking Turret, Associated Controls, 230 Volts, 3-Phase, 60 Hz, Rigging Cost $200- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
190
|
|
Famco Model F0FL00R OBI Press w/ Associated Stand, Rigging Cost $100- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
190
Description:
Famco Model F0FL00R OBI Press w/ Associated Stand, Rigging Cost $100- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
191
|
|
Delta 14 Inch Cut Off Saw w/ Adjustable Angle and Associated Stand, Rigging Cost $100- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
191
Description:
Delta 14 Inch Cut Off Saw w/ Adjustable Angle and Associated Stand, Rigging Cost $100- The pricing is to load the equipment onto your truck. Trucking is an extra charge and will be billed directly to the individual buyers. The rigging amount listed will be added to the buyers final auction invoice. Please contact Andy or AJ at Pedowitz Machinery Movers of CT at (203) 877-7458. Email: andy@pedowitz or aj@pedowitz.com
Category:
|
|
192
|
|
Lot of (2) Lot Boxes of Various Collets and Tool Holders
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
192
Description:
Lot of (2) Lot Boxes of Various Collets and Tool Holders
Category:
|
|
193
|
|
Lot of Various Sized R8 Collets
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
193
Description:
Lot of Various Sized R8 Collets
Category:
|
|
194
|
|
Lot of (2) Lot Boxes of Various Tool Holders and R8 Cutting Tools
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
194
Description:
Lot of (2) Lot Boxes of Various Tool Holders and R8 Cutting Tools
Category:
|
|
195
|
|
Lot of (2) Lot Boxes of Various Sized Cutting Tools
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
195
Description:
Lot of (2) Lot Boxes of Various Sized Cutting Tools
Category:
|
|
196
|
|
Lot Box of (5) 2" Milling Vises, Clamp, Vise
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
196
Description:
Lot Box of (5) 2" Milling Vises, Clamp, Vise
Category:
|
|
197
|
|
Large Lot of Various Sized C-Clamps, Sizes Range from Approx. 3" - 12"
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
197
Description:
Large Lot of Various Sized C-Clamps, Sizes Range from Approx. 3" - 12"
Category:
|
|
198
|
|
Lot of (6) Lot Boxes of Various Tooling Including Various Reamers, Drill Bits, Counter Bores, End Mills, Hold Downs and Assorted Other Tooling, Please Inspect
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
198
Description:
Lot of (6) Lot Boxes of Various Tooling Including Various Reamers, Drill Bits, Counter Bores, End Mills, Hold Downs and Assorted Other Tooling, Please Inspect
Category:
|
|
199
|
|
Lot of Hargrave #2 Spring Clamps, Large Qty, Please Inspect
Sold at G&G Instruments on 8/20/2013
|
Ardsley, NY
|
Lot Number:
199
Description:
Lot of Hargrave #2 Spring Clamps, Large Qty, Please Inspect
Category:
|