Gettig Technologies Inc – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 2 closing every minute in numerical order.

For Example: Lots 1 and 2 will start to close at 10:00 AM, Lots 3 and 4 will start to close at 10:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
Two Lots Close Per Minute beginning on  Wednesday, March 27th 2013 at 10:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
925 Met One Model A2408-1-115-1 Laser Particle Counter, s/n 95-35-71376
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 925

Description: Met One Model A2408-1-115-1 Laser Particle Counter, s/n 95-35-71376

Category:

926 Gettig Model 5409 4-Post Pneumatic Press w/ Associated Table
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 926

Description: Gettig Model 5409 4-Post Pneumatic Press w/ Associated Table

Category:

927 Gettig Custom Fabricated Glass Vial Sorting Station w/ Single Axis Slide Stage, Pneumatic Control, (1) 96" x 30" Work Bench
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 927

Description: Gettig Custom Fabricated Glass Vial Sorting Station w/ Single Axis Slide Stage, Pneumatic Control, (1) 96" x 30" Work Bench

Category:

928 Custom Fabricated Needle Insertion Station w/ (1) Single Axis Slide Stage w/ 12" x 12" Top, Associated Single Axis Drive Control, Vibratory Motor, Approx. 36" x 36" Aluminum Castered Work Bench
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 928

Description: Custom Fabricated Needle Insertion Station w/ (1) Single Axis Slide Stage w/ 12" x 12" Top, Associated Single Axis Drive Control, Vibratory Motor, Approx. 36" x 36" Aluminum Castered Work Bench

Category:

929 Large Lot of Various Stacking Totes w/ Associated Trays/Covers
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 929

Description: Large Lot of Various Stacking Totes w/ Associated Trays/Covers

Category:

930 Custom Fabricated Test Station w/ Single Axis Slide Stage w/ 12" x 12" Stand, Pneumatic Controls, Approx. 36" x 36" Aluminum Frame Castered Base
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 930

Description: Custom Fabricated Test Station w/ Single Axis Slide Stage w/ 12" x 12" Stand, Pneumatic Controls, Approx. 36" x 36" Aluminum Frame Castered Base

Category:

932 Lot of Various Custom Fabricated Equipment Including (1) Automated Inspection System w/ (1) FMC/Syntron Vibratory Parts Feeder Hopper, (1) Vibratory Alignment Station, Transport Station, (1) Capping Station, Pressing Station, Inspection Station w/ Reject Discharge Stations, (1) Outfeed Station, w/ Associated Aluminum Frame & Controls, (1) Vibratory Feeder w/ Alignment Station, Drop Down Shute, Single Axis Slide Stage w/ Approx. 12" x 12" Surface Area w/ Associated Motor Drive Control, Stainless Steel Table w/ Aluminum Top, Approx. 72" x 24", (1) Material Alignment Station w/ Vibratory Alignment Feeder, Drop Down & Pneumatic Pressing Station w/ Single Axis 12" x 12" Slide Stage, Associated Motor Drive Control, (1) Epoxy Station w/ (1) 12" x 12" Single Axis Slide Stage, Pressure Tank, 36" x 36" Aluminum Castered Work Bench
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 932

Description: Lot of Various Custom Fabricated Equipment Including (1) Automated Inspection System w/ (1) FMC/Syntron Vibratory Parts Feeder Hopper, (1) Vibratory Alignment Station, Transport Station, (1) Capping Station, Pressing Station, Inspection Station w/ Reject Discharge Stations, (1) Outfeed Station, w/ Associated Aluminum Frame & Controls, (1) Vibratory Feeder w/ Alignment Station, Drop Down Shute, Single Axis Slide Stage w/ Approx. 12" x 12" Surface Area w/ Associated Motor Drive Control, Stainless Steel Table w/ Aluminum Top, Approx. 72" x 24", (1) Material Alignment Station w/ Vibratory Alignment Feeder, Drop Down & Pneumatic Pressing Station w/ Single Axis 12" x 12" Slide Stage, Associated Motor Drive Control, (1) Epoxy Station w/ (1) 12" x 12" Single Axis Slide Stage, Pressure Tank, 36" x 36" Aluminum Castered Work Bench

Category:

933 Syntron Magnetic Vibratory Feeder, w/ (3) Associated 96" x 48" Tables, Associated Trackway for Manual Part Inspection
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 933

Description: Syntron Magnetic Vibratory Feeder, w/ (3) Associated 96" x 48" Tables, Associated Trackway for Manual Part Inspection

Category:

934 Approx. 12' Long x 30" Wide Mesh Belt Conveyor
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 934

Description: Approx. 12' Long x 30" Wide Mesh Belt Conveyor

Category:

935 (3) Custom Fabricated Needle Insertion Station w/ (1) Single Axis Slide Stage w/ 12" x 12" Top, Associated Single Axis Drive Control, Vibratory Motor, Approx. 36" x 36" Aluminum Castered Work Bench
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 935

Description: (3) Custom Fabricated Needle Insertion Station w/ (1) Single Axis Slide Stage w/ 12" x 12" Top, Associated Single Axis Drive Control, Vibratory Motor, Approx. 36" x 36" Aluminum Castered Work Bench

Category:

936 Lot of Miscellaneous Custom Fabricated Needle Assembly Equipment Including But Not Limited To: (1) Epoxy Station, (1) Capping Station w/ Single Axis Slide Stage & Motor Drive Control w/ Pneumatic Pistons, (2) Pneumatic Presses, (1) 36" x 36" Aluminum Frame Castered Work Bench, (1) Single Axis Slide Stage - Disassembled, (1) Syntron Vibratory Bowl Feeder, (1) Custom Fabricated Alignment Station w/ Associated Aluminum Top, Castered Cart
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 936

Description: Lot of Miscellaneous Custom Fabricated Needle Assembly Equipment Including But Not Limited To: (1) Epoxy Station, (1) Capping Station w/ Single Axis Slide Stage & Motor Drive Control w/ Pneumatic Pistons, (2) Pneumatic Presses, (1) 36" x 36" Aluminum Frame Castered Work Bench, (1) Single Axis Slide Stage - Disassembled, (1) Syntron Vibratory Bowl Feeder, (1) Custom Fabricated Alignment Station w/ Associated Aluminum Top, Castered Cart

Category:

937 Gettig Model 3409 4-Post Laboratory Press, w/ Associated Cart
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 937

Description: Gettig Model 3409 4-Post Laboratory Press, w/ Associated Cart

Category:

938 Lot of (2) 96" x 48" Castered Work Benches w/ Associated Contents Including But Not Limited To: (1) Custom Fabricated Pressing Station, (1) Inspection Station w/ Single Axis Slide Stage, (1) Vibratory Alignment System w/ End Off Drop Out Unit, (1) Automation Unlimited Model C62-401-111 X/Y-Axis, Motor Drive Control, (1) Sony Trintron 13" Close Circuit Display Monitor
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 938

Description: Lot of (2) 96" x 48" Castered Work Benches w/ Associated Contents Including But Not Limited To: (1) Custom Fabricated Pressing Station, (1) Inspection Station w/ Single Axis Slide Stage, (1) Vibratory Alignment System w/ End Off Drop Out Unit, (1) Automation Unlimited Model C62-401-111 X/Y-Axis, Motor Drive Control, (1) Sony Trintron 13" Close Circuit Display Monitor

Category:

939 Acculab V8 Series 4,000gr Cap. Digital Scale w/ Digital Readout & Power Supply
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 939

Description: Acculab V8 Series 4,000gr Cap. Digital Scale w/ Digital Readout & Power Supply

Category:

940 Lot of (3) American Optical 2X Stereo Microscopes w/ Associated Eyepieces
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 940

Description: Lot of (3) American Optical 2X Stereo Microscopes w/ Associated Eyepieces

Category:

941 Stainless Steel Castered Rollaround Work Bench, 60" x 30", (1) 96" x 48" Castered Work Bench, (1) 60" x 24" Work Bench w/ 18" L-Shaped Return, (1) Nilfisk Cleanroom Vacuum Cleaner
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 941

Description: Stainless Steel Castered Rollaround Work Bench, 60" x 30", (1) 96" x 48" Castered Work Bench, (1) 60" x 24" Work Bench w/ 18" L-Shaped Return, (1) Nilfisk Cleanroom Vacuum Cleaner

Category:

942 Hot Pack True Temp Oven Model 212050-27, 460 Volts, 3-Phase, 60 Hz w/ Digital Temperature Controls
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 942

Description: Hot Pack True Temp Oven Model 212050-27, 460 Volts, 3-Phase, 60 Hz w/ Digital Temperature Controls

Category:

943 Hot Pack True Temp Oven Model 212050-27, 460 Volts, 3-Phase, 60 Hz w/ Digital Temperature Controls
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 943

Description: Hot Pack True Temp Oven Model 212050-27, 460 Volts, 3-Phase, 60 Hz w/ Digital Temperature Controls

Category:

944 Lot of (4) Hotpack Vacuum Ovens, Each w/ Associated Welch Duo-Seal Vacuum Pumps, (1) Spare Welch Duo-Seal Vacuum Pump, (2) 60" x 36" Stainless Steel Top Castered Work Stations
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 944

Description: Lot of (4) Hotpack Vacuum Ovens, Each w/ Associated Welch Duo-Seal Vacuum Pumps, (1) Spare Welch Duo-Seal Vacuum Pump, (2) 60" x 36" Stainless Steel Top Castered Work Stations

Category:

945 Hotpack Model 8423-6 3-Zone Conveyorized Oven w/ 18" Mesh Belt Conveyor, Conveyorized Length Approx. 14', Oven Tunnel Length Approx. 11'
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 945

Description: Hotpack Model 8423-6 3-Zone Conveyorized Oven w/ 18" Mesh Belt Conveyor, Conveyorized Length Approx. 14', Oven Tunnel Length Approx. 11'

Category:

946 96" x 48" Stainless Steel Work Bench, (1) 60" x 36" Work Bench w/ Upper Shelving, (1) 30" x 24" Work Station, (1) 30" x 20" Castered Rollaround Work Cart
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 946

Description: 96" x 48" Stainless Steel Work Bench, (1) 60" x 36" Work Bench w/ Upper Shelving, (1) 30" x 24" Work Station, (1) 30" x 20" Castered Rollaround Work Cart

Category:

947 Pennsylvania Scale Company Balancing Gram Scale, (1) Ohaus Dial-O-Gram 2,610gr Cap. Triple Beam Balance Scale
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 947

Description: Pennsylvania Scale Company Balancing Gram Scale, (1) Ohaus Dial-O-Gram 2,610gr Cap. Triple Beam Balance Scale

Category:

948 Gettig Custom Fabricated Needle Prep Station w/ (2) Allen Air Corporation Model 725GA Pneumatic Rotary Tables, (2) Single Axis Slide Stages, (1) Automated Unlimited XY-Axis Motor Drive Control w/ 36" x 36" Aluminum Cart, (1) Gettig Custom Fabricated Pneumatic 4-Post Press, (1) Dake Model 0 Arbor Press
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 948

Description: Gettig Custom Fabricated Needle Prep Station w/ (2) Allen Air Corporation Model 725GA Pneumatic Rotary Tables, (2) Single Axis Slide Stages, (1) Automated Unlimited XY-Axis Motor Drive Control w/ 36" x 36" Aluminum Cart, (1) Gettig Custom Fabricated Pneumatic 4-Post Press, (1) Dake Model 0 Arbor Press

Category:

949 96" x 36" Work Bench w/ Associated Upper Shelving, (1) 36" x 24" Work Bench w/ Associated Inspection Lamps, (1) Meterpak Model 1040 Epoxy Dispensing System
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 949

Description: 96" x 36" Work Bench w/ Associated Upper Shelving, (1) 36" x 24" Work Bench w/ Associated Inspection Lamps, (1) Meterpak Model 1040 Epoxy Dispensing System

Category:

950 Hotpack Model 284239-9 4-Zone Conveyorized Oven, w/ Approx. 18" Mesh Belt Conveyor, Approx. 16' Long Conveyor Area Including Infeed & Outfeed Station, Approx. 11' Long Tunnel
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 950

Description: Hotpack Model 284239-9 4-Zone Conveyorized Oven, w/ Approx. 18" Mesh Belt Conveyor, Approx. 16' Long Conveyor Area Including Infeed & Outfeed Station, Approx. 11' Long Tunnel

Category:

951 Large Lot of Various Sized Work Benches Including But Not Limited To: 96" x 48" Work Bench, (1) 30" x 36" Work Bench, (3) 48" x 30" Work Benches, (4) 36" x 24" Work Benches, (1) 36" x 30" Work Bench, (2) 2-Tier Castered Rollaround Carts
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 951

Description: Large Lot of Various Sized Work Benches Including But Not Limited To: 96" x 48" Work Bench, (1) 30" x 36" Work Bench, (3) 48" x 30" Work Benches, (4) 36" x 24" Work Benches, (1) 36" x 30" Work Bench, (2) 2-Tier Castered Rollaround Carts

Category:

952 USI Hot Stamping Machines, Model US-05 w/ 8-Position Rotary Platen, Custom Base, Associated Controls
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 952

Description: USI Hot Stamping Machines, Model US-05 w/ 8-Position Rotary Platen, Custom Base, Associated Controls

Category:

953 USI Hot Stamping Machines, Model US-05 w/ 8-Position Rotary Platen, Custom Base, Associated Controls
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 953

Description: USI Hot Stamping Machines, Model US-05 w/ 8-Position Rotary Platen, Custom Base, Associated Controls

Category:

954 Lot of Various Gettig Custom Fabricated Needle Alignment and Prep Stations Including: Gettig Model 7840 Needle Insertion Station w/ Icon Single Axis Slide Stage w/ 12" x 12" Surface Area and Associated Motor Drives Controls, Vibratory Feeder Controls, Approx. 60" x 24" Aluminum Top SS Cart, (1) Alignment Station w/ Single Axis Slide Station, Pneumatic Press, Custom 36" x 36" Cart, Pneumatic Pressure Test Station w/ Associated Pneumatic Controls, 36" x 36" Aluminum Framed Cart, Custom Fabricated Blow Off Station w/ Associated Blow Off Head, 48" x 24" Castered Cart w/ Aluminum Top
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 954

Description: Lot of Various Gettig Custom Fabricated Needle Alignment and Prep Stations Including: Gettig Model 7840 Needle Insertion Station w/ Icon Single Axis Slide Stage w/ 12" x 12" Surface Area and Associated Motor Drives Controls, Vibratory Feeder Controls, Approx. 60" x 24" Aluminum Top SS Cart, (1) Alignment Station w/ Single Axis Slide Station, Pneumatic Press, Custom 36" x 36" Cart, Pneumatic Pressure Test Station w/ Associated Pneumatic Controls, 36" x 36" Aluminum Framed Cart, Custom Fabricated Blow Off Station w/ Associated Blow Off Head, 48" x 24" Castered Cart w/ Aluminum Top

Category:

955 Custom Fabricated Laser Inspection Station Complete w/ 2-Axis Slide Stage w/ Approx. 12" x 12" Slide Stage Surface Area, Associated Automated Unlimited X, Y Axis Controls, Sony Trinitron Closed Circuit Display Station w/ Associated Laser and Video Inspection Equipment w/ Aluminum Framed 36" x 36" Castered Base
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 955

Description: Custom Fabricated Laser Inspection Station Complete w/ 2-Axis Slide Stage w/ Approx. 12" x 12" Slide Stage Surface Area, Associated Automated Unlimited X, Y Axis Controls, Sony Trinitron Closed Circuit Display Station w/ Associated Laser and Video Inspection Equipment w/ Aluminum Framed 36" x 36" Castered Base

Category:

956 Hot Pack True Temp Oven Model 212050-27, 460 Volts, 3-Phase, 60 Hz w/ Digital Temperature Controls
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 956

Description: Hot Pack True Temp Oven Model 212050-27, 460 Volts, 3-Phase, 60 Hz w/ Digital Temperature Controls

Category:

957 Lot of (4) Hotpack 4-Wheel Roll Around Tray Insertion Carts w/ Associated SS Trays
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 957

Description: Lot of (4) Hotpack 4-Wheel Roll Around Tray Insertion Carts w/ Associated SS Trays

Category:

958 Lot of (2) 96" x 36" Workbenches, (1) 60" x 30" Roll Around Workbench, (1) 48" x 24" 2-Tier Roll Around Cart, 30-Bin Cap. Shelving Unit w/ Associated Contents Including Various Electrical Extension Cords, Pneumatic Hoses
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 958

Description: Lot of (2) 96" x 36" Workbenches, (1) 60" x 30" Roll Around Workbench, (1) 48" x 24" 2-Tier Roll Around Cart, 30-Bin Cap. Shelving Unit w/ Associated Contents Including Various Electrical Extension Cords, Pneumatic Hoses

Category:

959 Custom Fabricated Needle Test Station Complete Associated Pneumatic Controls, 4-Post Press, 48" x 36" SS Roll Around Cart, (1) Gettig Model 3409 4-Post Press w/ Associated 60" x 42" Table
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 959

Description: Custom Fabricated Needle Test Station Complete Associated Pneumatic Controls, 4-Post Press, 48" x 36" SS Roll Around Cart, (1) Gettig Model 3409 4-Post Press w/ Associated 60" x 42" Table

Category:

960 Gruenberg Model MM50VU160 4-Zone Conveyorized Oven w/ 12" Mesh Belt Conveyor, Approx. 15' Long
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 960

Description: Gruenberg Model MM50VU160 4-Zone Conveyorized Oven w/ 12" Mesh Belt Conveyor, Approx. 15' Long

Category:

961 Hot Pack True Temp Oven Model 212050-27, 460 Volts, 3-Phase, 60 Hz w/ Digital Temperature Controls
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 961

Description: Hot Pack True Temp Oven Model 212050-27, 460 Volts, 3-Phase, 60 Hz w/ Digital Temperature Controls

Category:

962 Custom Fabricated Rotary Plunger Prep Station w/ ????? Load Out, Branson Model TH-1620 SS Ultrasonic Clean Bath, Bath Only, No Generator, GE 13" TV/VCR Combo, 30" x 24" Roll Around Cart, 18" x 18" Work Stand, 96" x 30" Workbench
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 962

Description: Custom Fabricated Rotary Plunger Prep Station w/ ????? Load Out, Branson Model TH-1620 SS Ultrasonic Clean Bath, Bath Only, No Generator, GE 13" TV/VCR Combo, 30" x 24" Roll Around Cart, 18" x 18" Work Stand, 96" x 30" Workbench

Category:

963 Lot of (2) 5-Shelf 4-Wheel Roll Around Carts w/ Associated Contents
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 963

Description: Lot of (2) 5-Shelf 4-Wheel Roll Around Carts w/ Associated Contents

Category:

964 Approx. 108" x 30" Wide Workbench w/ Small Return and Contents Including: Epoxy Filling Station, Various Pneumatic Cylinders, C-Clamps, Regulators, Assorted Spare Parts
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 964

Description: Approx. 108" x 30" Wide Workbench w/ Small Return and Contents Including: Epoxy Filling Station, Various Pneumatic Cylinders, C-Clamps, Regulators, Assorted Spare Parts

Category:

965 Lot of (3) Plunger Insertion Stations w/ Associated Pneumatic Controls
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 965

Description: Lot of (3) Plunger Insertion Stations w/ Associated Pneumatic Controls

Category:

966 Lot of (2) FMC Syntron Approx. 15" Vibratory Feeder Bowls w/ (1) 60" x 36" SS Roll Around Castered Work Bench
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 966

Description: Lot of (2) FMC Syntron Approx. 15" Vibratory Feeder Bowls w/ (1) 60" x 36" SS Roll Around Castered Work Bench

Category:

967 Lot of (3) 3-Step Portable Staircases
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 967

Description: Lot of (3) 3-Step Portable Staircases

Category:

968 Gardner-Denver Electra Screw 30 HP Rotary Screw Air Compressor, Total Hours 5377.2
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 968

Description: Gardner-Denver Electra Screw 30 HP Rotary Screw Air Compressor, Total Hours 5377.2

Category:

969 Gardner Denver Electrascrew 30 HP Rotary Screw Air Compressor w/ 16-Gallon Cap. Storage Tank, Total Hours 07883.9
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 969

Description: Gardner Denver Electrascrew 30 HP Rotary Screw Air Compressor w/ 16-Gallon Cap. Storage Tank, Total Hours 07883.9

Category:

970 Kelair Model 25 Refrigerated Air Dryer
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 970

Description: Kelair Model 25 Refrigerated Air Dryer

Category:

971 Approx. 100 Gallon Cap. Vertical Air Storage Tank w/ Associated Condensate Filter Trap
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 971

Description: Approx. 100 Gallon Cap. Vertical Air Storage Tank w/ Associated Condensate Filter Trap

Category:

972 Lincoln 1755 RPM 30 HP Motor, 230 - 460 Volts, 3-Phase, 60 Hz
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 972

Description: Lincoln 1755 RPM 30 HP Motor, 230 - 460 Volts, 3-Phase, 60 Hz

Category:

973 Toledo Over Under Model 4656-FP 25 Lb. Cap. Scale, Hotsy Steam Cleaning Unit, (1) 48" x 36" Roll Around Workbench, 48" x 24" Workbench, Custom Fabricated 6-Shelf Storage Unit, Garment Rack
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 973

Description: Toledo Over Under Model 4656-FP 25 Lb. Cap. Scale, Hotsy Steam Cleaning Unit, (1) 48" x 36" Roll Around Workbench, 48" x 24" Workbench, Custom Fabricated 6-Shelf Storage Unit, Garment Rack

Category:

974 Approx. 50-Gallon Cap. Air Storage Tank
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 974

Description: Approx. 50-Gallon Cap. Air Storage Tank

Category:

975 Lot of Misc. Equipment Including But Not Limited to: (6) Illuminated Inspection Lamps, (1) Custom Fabricated Vibratory Pressing Station, Icon Single Axis Motor Drive Control Model 061-401-111, (2) 2-Posst Press Dies, (1) Custom Bake Off Station, 96" x 36" Workbench, 36" x 30" Workbench, 60" x 24" Workbench w/ Shelving, (2) 18" x 18" Work Stands
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 975

Description: Lot of Misc. Equipment Including But Not Limited to: (6) Illuminated Inspection Lamps, (1) Custom Fabricated Vibratory Pressing Station, Icon Single Axis Motor Drive Control Model 061-401-111, (2) 2-Posst Press Dies, (1) Custom Bake Off Station, 96" x 36" Workbench, 36" x 30" Workbench, 60" x 24" Workbench w/ Shelving, (2) 18" x 18" Work Stands

Category:

 
Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577