Gettig Technologies Inc – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 2 closing every minute in numerical order.

For Example: Lots 1 and 2 will start to close at 10:00 AM, Lots 3 and 4 will start to close at 10:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
Two Lots Close Per Minute beginning on  Wednesday, March 27th 2013 at 10:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
976 Custom Fabricated Vibratory Needle Insertion Station w/ Vibratory Bowl Feeder, Casing and Alignment Station Drop Down and Pneumatic Insertion Press w/ Single Axis Slide Stage, Associated Vibratory Feeder Controls, (1) Needle Insertion Station for Parts, Includes (1) 12" x 12" Single Axis Slide Stage, Various Needle Components, 72" x 24" Aluminum Top Base
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 976

Description: Custom Fabricated Vibratory Needle Insertion Station w/ Vibratory Bowl Feeder, Casing and Alignment Station Drop Down and Pneumatic Insertion Press w/ Single Axis Slide Stage, Associated Vibratory Feeder Controls, (1) Needle Insertion Station for Parts, Includes (1) 12" x 12" Single Axis Slide Stage, Various Needle Components, 72" x 24" Aluminum Top Base

Category:

977 Lot of (2) Custom Fabricated Needle Insertion Stations Complete w/ Icon Single Access Slide Stages w/ Approx. 18" x 18" Surface Area and Motor Drive Controls
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 977

Description: Lot of (2) Custom Fabricated Needle Insertion Stations Complete w/ Icon Single Access Slide Stages w/ Approx. 18" x 18" Surface Area and Motor Drive Controls

Category:

978 Lot of (2) Gettig Custom Fabricated 4-Post Presses w/ Associated Roll Around Work Carts
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 978

Description: Lot of (2) Gettig Custom Fabricated 4-Post Presses w/ Associated Roll Around Work Carts

Category:

979 (2) FMC/Syntron 15" Vibratory Bowl Feeders, Syntron Model LPC01 Vibratory Parts Feeder, 96" x 30" Workbench, 60" x 18" Workbench, 48" x 24" Workbench, Workstand
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 979

Description: (2) FMC/Syntron 15" Vibratory Bowl Feeders, Syntron Model LPC01 Vibratory Parts Feeder, 96" x 30" Workbench, 60" x 18" Workbench, 48" x 24" Workbench, Workstand

Category:

980 Toledo Honest-Weight 250 Lb. Cap. Balance Scale
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 980

Description: Toledo Honest-Weight 250 Lb. Cap. Balance Scale

Category:

981 Enercon Industries Compak Universal Power Supply w/ (2) Electrical Treatment Machines
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 981

Description: Enercon Industries Compak Universal Power Supply w/ (2) Electrical Treatment Machines

Category:

982 Gettig Custom Fabricated 4-Post Press, 2-Post Arbor Style Pressing Station, Custom Fabricated Square Off Station, 5-Tier 4-Wheel Roll Around Cart w/ Associated Needle Holders, Syringe Holders, Assorted Other Gear
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 982

Description: Gettig Custom Fabricated 4-Post Press, 2-Post Arbor Style Pressing Station, Custom Fabricated Square Off Station, 5-Tier 4-Wheel Roll Around Cart w/ Associated Needle Holders, Syringe Holders, Assorted Other Gear

Category:

983 Needle Alignment Station w/ Icon Single Axis slide Station Control, Single Axis Slide Stage 12" x 12" Surface Area, Associated 36" x 36" Workbench, Needle Alignment Station w/ Vibratory Alignment Run, Icon Single Axis Motor Drive Control, Single Axis Slide Stage, 12" x 12" Top
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 983

Description: Needle Alignment Station w/ Icon Single Axis slide Station Control, Single Axis Slide Stage 12" x 12" Surface Area, Associated 36" x 36" Workbench, Needle Alignment Station w/ Vibratory Alignment Run, Icon Single Axis Motor Drive Control, Single Axis Slide Stage, 12" x 12" Top

Category:

984 (2) Custom Fabricated Vibratory Fed Needle Insertion Stations, w/ Vibratory Bowl Feeder, Casing Alignment Line, Drop Down and Pneumatic Insertion Press w/ Single Axis Slide Stage
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 984

Description: (2) Custom Fabricated Vibratory Fed Needle Insertion Stations, w/ Vibratory Bowl Feeder, Casing Alignment Line, Drop Down and Pneumatic Insertion Press w/ Single Axis Slide Stage

Category:

985 (2) Custom Fabricated Vibratory Fed Needle Insertion Stations, w/ Vibratory Bowl Feeder, Casing Alignment Line, Drop Down and Pneumatic Insertion Press w/ Single Axis Slide Stage
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 985

Description: (2) Custom Fabricated Vibratory Fed Needle Insertion Stations, w/ Vibratory Bowl Feeder, Casing Alignment Line, Drop Down and Pneumatic Insertion Press w/ Single Axis Slide Stage

Category:

986 Lot of (3) 5-Tier 4-Wheel Roll Around Carts and Contents to Include: Needle Holding Trays, Various Fixture Plates, Needle Alignment Plates, Assorted Pneumatic Hoses and Blow Off Tooling
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 986

Description: Lot of (3) 5-Tier 4-Wheel Roll Around Carts and Contents to Include: Needle Holding Trays, Various Fixture Plates, Needle Alignment Plates, Assorted Pneumatic Hoses and Blow Off Tooling

Category:

987 Hot Pack 4-Zone Reflow Oven Model 84230-4, s/n 35803, 230 Volts, 3-Phase, 60 Hz w/ Approx. 20" Mesh Belt Conveyor, Approx. 10' Tunnel Length, 14' Conveyor Length
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 987

Description: Hot Pack 4-Zone Reflow Oven Model 84230-4, s/n 35803, 230 Volts, 3-Phase, 60 Hz w/ Approx. 20" Mesh Belt Conveyor, Approx. 10' Tunnel Length, 14' Conveyor Length

Category:

988 Lot of (2) Approx. 1-Gallon Cap. Spray Paint Pressure Pots
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 988

Description: Lot of (2) Approx. 1-Gallon Cap. Spray Paint Pressure Pots

Category:

989 Lot of (3) Crest Model 43500-6 Genesis Series Ultrasonic Generators
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 989

Description: Lot of (3) Crest Model 43500-6 Genesis Series Ultrasonic Generators

Category:

990 Lot of Miscellaneous Furniture Including But Not Limited To: (1) 72" x 30" Work Bench w/ Lower Cabinetry, (1) 96" x 30" Work Bench w/Upper & Lower Shelving & Miscellaneous Contents, (1) 120" x 24" Work Bench w/ Lower Shelving, Upper Shelving & Upper Cabinetry, (1) Steelcase 7-Drawer 60" x 30"{ Desk, (1) 38" x 36" Rollaround Work Bench, (2) 96" x 36" Folding Tables, (3) 72" x 36" Folding Tables, (1) 24" x 36" Work Station
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 990

Description: Lot of Miscellaneous Furniture Including But Not Limited To: (1) 72" x 30" Work Bench w/ Lower Cabinetry, (1) 96" x 30" Work Bench w/Upper & Lower Shelving & Miscellaneous Contents, (1) 120" x 24" Work Bench w/ Lower Shelving, Upper Shelving & Upper Cabinetry, (1) Steelcase 7-Drawer 60" x 30"{ Desk, (1) 38" x 36" Rollaround Work Bench, (2) 96" x 36" Folding Tables, (3) 72" x 36" Folding Tables, (1) 24" x 36" Work Station

Category:

991 FMC Syntron Model EB010 Approx. 15" Dia. Vibratory Feeder Bowl
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 991

Description: FMC Syntron Model EB010 Approx. 15" Dia. Vibratory Feeder Bowl

Category:

992 Eagle Model 1926 2-Door Horizontal Drum Storage Cabinet, w/ Wesco 600-Lb Cap. 55-Gallon Drum Dolly/Tote
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 992

Description: Eagle Model 1926 2-Door Horizontal Drum Storage Cabinet, w/ Wesco 600-Lb Cap. 55-Gallon Drum Dolly/Tote

Category:

993 Eagle Model HAZ-1926 55-Gallon Cap. 2-Door Flammable Hazardous Waste Storage Cabinet
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 993

Description: Eagle Model HAZ-1926 55-Gallon Cap. 2-Door Flammable Hazardous Waste Storage Cabinet

Category:

994 Marathon Model CK286TSTDR7J-1BBW 30-HP Electric Motor, Rebuilt On Skid
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 994

Description: Marathon Model CK286TSTDR7J-1BBW 30-HP Electric Motor, Rebuilt On Skid

Category:

995 Lot of (3) Respironics Testing Machines
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 995

Description: Lot of (3) Respironics Testing Machines

Category:

996 Lot of Various Sized Fiberglass Heat Resistant Sheeting Material, Used Around Conveyorized Oven Lines w/ Associated Accessories, (1) Platform Dolly
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 996

Description: Lot of Various Sized Fiberglass Heat Resistant Sheeting Material, Used Around Conveyorized Oven Lines w/ Associated Accessories, (1) Platform Dolly

Category:

997 Contents of Mezzanine Area Including Large Quantity of Various Custom Fabricated Needle Insertion & Manufacturing Machines, Vibratory Bowls, Spare Trays, Large Quantity of Various Spare Parts Including Motors, Controls, Control Boxes, Vacuum Pump Parts, Various Load Carts, Fan Blades, All In Varying Conditions, Large Quantity of Miscellaneous Sized Corrugated Boxes, (5) 96" x 36" Folding Tables, Various Stainless Steel Trays, (2) Hotpack Load Carts, Etc - Please Inspect
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 997

Description: Contents of Mezzanine Area Including Large Quantity of Various Custom Fabricated Needle Insertion & Manufacturing Machines, Vibratory Bowls, Spare Trays, Large Quantity of Various Spare Parts Including Motors, Controls, Control Boxes, Vacuum Pump Parts, Various Load Carts, Fan Blades, All In Varying Conditions, Large Quantity of Miscellaneous Sized Corrugated Boxes, (5) 96" x 36" Folding Tables, Various Stainless Steel Trays, (2) Hotpack Load Carts, Etc - Please Inspect

Category:

998 Large Lot of Various Needle Manufacturing Supplies Including Various Glass Tubes, Plungers, Plugs, Bags - Please Note: No Needles Included w/ Lot, Please Inspect
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 998

Description: Large Lot of Various Needle Manufacturing Supplies Including Various Glass Tubes, Plungers, Plugs, Bags - Please Note: No Needles Included w/ Lot, Please Inspect

Category:

999 Autoquip 5,000-lb Cap. 72" x 48" Portable Lift Gate Style Platform Lift
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 999

Description: Autoquip 5,000-lb Cap. 72" x 48" Portable Lift Gate Style Platform Lift

Category:

1000 Autoquip 5,000-lb Cap. 72" x 48" Portable Lift Gate Style Platform Lift
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 1000

Description: Autoquip 5,000-lb Cap. 72" x 48" Portable Lift Gate Style Platform Lift

Category:

1001 Large Lot of Various 3-1/2-Gallon Cap. Plastic pails w/ Associated Covers
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 1001

Description: Large Lot of Various 3-1/2-Gallon Cap. Plastic pails w/ Associated Covers

Category:

1002 Lot of (2) 6' Fork Extensions, (1) Ecoa Pul-2 Scissor Style Pallet Puller
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 1002

Description: Lot of (2) 6' Fork Extensions, (1) Ecoa Pul-2 Scissor Style Pallet Puller

Category:

1003 CM Lodestar Model 1 1-Ton Cap. Overhead Chain Hoist, w/ Associated Approx. 60" x 48" Lifting Platform w/ Guide Rails
Sold at Gettig Technologies Inc on 3/27/2013
Spring Mills, PA

Lot Number: 1003

Description: CM Lodestar Model 1 1-Ton Cap. Overhead Chain Hoist, w/ Associated Approx. 60" x 48" Lifting Platform w/ Guide Rails

Category:

 
Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577