buy instagram followers
register Login

Jabil San Jose – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 2 closing every minute in numerical order.

For Example: Lots 1 and 2 will start to close at 9:00 AM, Lots 3 and 4 will start to close at 9:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
Two Lots Close Per Minute beginning on  Thursday, September 26th 2019 at 9:00 AM Pacific / 12:00 PM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $118.00 and a $100.00 purchase paying via credit card the total with BP is $121.00) 18% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 21% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
1 Lot of Twelve (12), Rubbermaid Shop Carts, 36" x 24" San Jose CA

Lot Number: 1

Description: Lot of Twelve (12), Rubbermaid Shop Carts, 36" x 24"

Category:

2 Lot of Eleven (11), Assorted Grinders and Sanders including Two (2) Makita GA7021 Angle Grinders, Three (3) Makita 9654 Grinders, also includes Cabinet of Abrasives and cart San Jose CA

Lot Number: 2

Description: Lot of Eleven (11), Assorted Grinders and Sanders including Two (2) Makita GA7021 Angle Grinders, Three (3) Makita 9654 Grinders, also includes Cabinet of Abrasives and cart

Category:

3 48" x 24", Manual Hydraulic, Rolling Scissor Lift Table San Jose CA

Lot Number: 3

Description: 48" x 24", Manual Hydraulic, Rolling Scissor Lift Table

Category:

4 Lot of Two (2) Tables to include: 60" x 30" Workbench with 2' Wood Butcher Block Top and 36" x 20" Small Steel Table San Jose CA

Lot Number: 4

Description: Lot of Two (2) Tables to include: 60" x 30" Workbench with 2' Wood Butcher Block Top and 36" x 20" Small Steel Table

Category:

5 Baileigh Model DDTM-8024 Metal Working Down Draft Table, Self Contained, 80" x 24", 3mm thick, Stainless Steel Grinding Table, 660 lbs. capacity San Jose CA

Lot Number: 5

Description: Baileigh Model DDTM-8024 Metal Working Down Draft Table, Self Contained, 80" x 24", 3mm thick, Stainless Steel Grinding Table, 660 lbs. capacity

Category:

6 Lot of Two (2), Room Dividers, Approx. 17' length San Jose CA

Lot Number: 6

Description: Lot of Two (2), Room Dividers, Approx. 17' length

Category:

7 Assorted Scrap Steel, includes 6' Rolling Cart San Jose CA

Lot Number: 7

Description: Assorted Scrap Steel, includes 6' Rolling Cart

Category:

8 Lot of Five (5), 96" x 96" Welding Curtains San Jose CA

Lot Number: 8

Description: Lot of Five (5), 96" x 96" Welding Curtains

Category:

9 Amada Model HD1003ATC Automatic Tool Changing CNC Press Brake, 100 Ton Capacity, 122.4" Table Length, 122.4" Max Bending Length, 106.3" Distance Between Uprights, 17.7" Throat Depth, 7.9" Length of Stroke. 24.4" Open Height, S/n#10034097 (2014), with Astro Automatic Tool Changer and Amada AMNC-PC CNC Controller, w/ Tooling for Amada HD1003ATC CNC Press Brake,

Tool List
San Jose CA

Lot Number: 9

Description: Amada Model HD1003ATC Automatic Tool Changing CNC Press Brake, 100 Ton Capacity, 122.4" Table Length, 122.4" Max Bending Length, 106.3" Distance Between Uprights, 17.7" Throat Depth, 7.9" Length of Stroke. 24.4" Open Height, S/n#10034097 (2014), with Astro Automatic Tool Changer and Amada AMNC-PC CNC Controller, w/ Tooling for Amada HD1003ATC CNC Press Brake,

Tool List

Category:

10 Amada Model M-2045 Shearing Machine, Capacities: Length 2000/78.74 mm/inch, Thickness 4.5/0.177 mm/inch, 60 SPM, SS.125" thk max AL .177 60" tol +/-.02", S/n#2407878 (1984), 460V 3 Phase San Jose CA

Lot Number: 10

Description: Amada Model M-2045 Shearing Machine, Capacities: Length 2000/78.74 mm/inch, Thickness 4.5/0.177 mm/inch, 60 SPM, SS.125" thk max AL .177 60" tol +/-.02", S/n#2407878 (1984), 460V 3 Phase

Category:

11 Amada Model SPH-30C Punch Press, Distance Between Uprights 390/15.4 mm/inch, Throat Depth 510/20.1 mm/inch, Length of Stroke 100/3.94 mm/inch, Open Height 520/20.5 mm/inch, .062 to 1.25 R .104" thk 38 x 14.38" Travel, S/n#308767 (1984), 460V 3 Phase, with Amadan SS-104 Positioning Attachment, Amadan SS System II Controller, Includes Cabinet with Punch Tooling San Jose CA

Lot Number: 11

Description: Amada Model SPH-30C Punch Press, Distance Between Uprights 390/15.4 mm/inch, Throat Depth 510/20.1 mm/inch, Length of Stroke 100/3.94 mm/inch, Open Height 520/20.5 mm/inch, .062 to 1.25 R .104" thk 38 x 14.38" Travel, S/n#308767 (1984), 460V 3 Phase, with Amadan SS-104 Positioning Attachment, Amadan SS System II Controller, Includes Cabinet with Punch Tooling

Category:

12 Amada Model CS-220 Hydraulic Corner Notcher, 10 Ton Capacity, 7/8" Ram Stroke, Capacities: Length 8.625" x 8.625", Thickness 1/8", S/n#54473 (1984), 460V 3 Phase San Jose CA

Lot Number: 12

Description: Amada Model CS-220 Hydraulic Corner Notcher, 10 Ton Capacity, 7/8" Ram Stroke, Capacities: Length 8.625" x 8.625", Thickness 1/8", S/n#54473 (1984), 460V 3 Phase

Category:

13 Lot of Two (2) Material Handling Rollers San Jose CA

Lot Number: 13

Description: Lot of Two (2) Material Handling Rollers

Category:

14 Bridgeport Series I Vertical Mill, Table Travel X axis - 36", Saddle Travel Y axis - 12", Quill Travel - 5", Knee Travel Z axis - 16", Ram Travel - 12", Throat Distance min - 6.75", Throat Distance max - 18.75", Table to Spindle Nose Gauge Line - 2.5" min / 18.25 max. Table - overall size - 42" X 9", Working Surface - 49" X 9", T-Slot center - 3 @ 2.5", T-Slot size - .625", Spindle Taper - R-8, Tooling - R-8 collets, Speed Range - 500-4200, 208/230/460 volts, 3 phase, 50/60 cycle, with Acu-Rite Digital Read Out, Includes Cart with Accessories San Jose CA

Lot Number: 14

Description: Bridgeport Series I Vertical Mill, Table Travel X axis - 36", Saddle Travel Y axis - 12", Quill Travel - 5", Knee Travel Z axis - 16", Ram Travel - 12", Throat Distance min - 6.75", Throat Distance max - 18.75", Table to Spindle Nose Gauge Line - 2.5" min / 18.25 max. Table - overall size - 42" X 9", Working Surface - 49" X 9", T-Slot center - 3 @ 2.5", T-Slot size - .625", Spindle Taper - R-8, Tooling - R-8 collets, Speed Range - 500-4200, 208/230/460 volts, 3 phase, 50/60 cycle, with Acu-Rite Digital Read Out, Includes Cart with Accessories

Category:

15 Lot of Three (3), Carts, Table, and Rolling Material Cart San Jose CA

Lot Number: 15

Description: Lot of Three (3), Carts, Table, and Rolling Material Cart

Category:

16 Lot of Five (5), Chrome Racks, Two (2), on Casters San Jose CA

Lot Number: 16

Description: Lot of Five (5), Chrome Racks, Two (2), on Casters

Category:

17 Mitsubishi Model 3015HV2-R 2D CO2 Laser Cutting Machine, Travels x/y/z (in/mm) 122"" x 61 x 11.8" (3100 x 1550 x 300), Workpiece Dimensions W x D (in/mm) 120" x 60" (3050 x 1525), Tube Cutting Cap., 8700 Power on Hours, 7444 Laser, 10' Bed, 3500 kW Laser, w/ Mitsubishi 45CP-R CO2 Laser, 1" Cutting Cap. S/n#653V23H103, (2016), with Mitsubishi Model LC30BV2 CO2 Laser Control Unit, Mitsubishi Model ML45CF-R CO2 Laser Processing System, Thermal Care Model NA20C4LXF AccuChiller, and Donaldson Torit Model DF04-16 Dust Collector, also includes all tables, cabinets and accessories as pictured San Jose CA

Lot Number: 17

Description: Mitsubishi Model 3015HV2-R 2D CO2 Laser Cutting Machine, Travels x/y/z (in/mm) 122"" x 61 x 11.8" (3100 x 1550 x 300), Workpiece Dimensions W x D (in/mm) 120" x 60" (3050 x 1525), Tube Cutting Cap., 8700 Power on Hours, 7444 Laser, 10' Bed, 3500 kW Laser, w/ Mitsubishi 45CP-R CO2 Laser, 1" Cutting Cap. S/n#653V23H103, (2016), with Mitsubishi Model LC30BV2 CO2 Laser Control Unit, Mitsubishi Model ML45CF-R CO2 Laser Processing System, Thermal Care Model NA20C4LXF AccuChiller, and Donaldson Torit Model DF04-16 Dust Collector, also includes all tables, cabinets and accessories as pictured

Category:

18 Amada Model RG 80 Press Brake, 94.6" Table Length, 98.7" Max Bending Length, 80.8" Distance Between Uprights, 15.76" Throat Depth, 3.94" Length of Stroke, 14.8" Open Height, S/n#807768 (1988), 220V, 3 Phase, with Amada Model NC9-EX II Controller San Jose CA

Lot Number: 18

Description: Amada Model RG 80 Press Brake, 94.6" Table Length, 98.7" Max Bending Length, 80.8" Distance Between Uprights, 15.76" Throat Depth, 3.94" Length of Stroke, 14.8" Open Height, S/n#807768 (1988), 220V, 3 Phase, with Amada Model NC9-EX II Controller

Category:

19 Amada Model RG 80 Press Brake, 94.6" Table Length, 98.7" Max Bending Length, 80.8" Distance Between Uprights, 15.76", 3.94" Length of Stroke, 14.8" Open Height, S/n#811057 (1996), 220V, 3 Phase, with Amada Model NC9-EX II Controller San Jose CA

Lot Number: 19

Description: Amada Model RG 80 Press Brake, 94.6" Table Length, 98.7" Max Bending Length, 80.8" Distance Between Uprights, 15.76", 3.94" Length of Stroke, 14.8" Open Height, S/n#811057 (1996), 220V, 3 Phase, with Amada Model NC9-EX II Controller

Category:

20 Amada RG 80 Press Brake Tooling, Includes Five (5) Racks/Carts Upper and Lower Press Brake Tooling San Jose CA

Lot Number: 20

Description: Amada RG 80 Press Brake Tooling, Includes Five (5) Racks/Carts Upper and Lower Press Brake Tooling

Category:

21 Rolling Parts Rack with Bins and contents San Jose CA

Lot Number: 21

Description: Rolling Parts Rack with Bins and contents

Category:

22 Pyramid Granite 24" x 36" x 4" Granite Surface Plate with Stand San Jose CA

Lot Number: 22

Description: Pyramid Granite 24" x 36" x 4" Granite Surface Plate with Stand

Category:

23 Lot of Three (3) 108" x 96"H Welding Curtains San Jose CA

Lot Number: 23

Description: Lot of Three (3) 108" x 96"H Welding Curtains

Category:

24 72" x 30" Steel Table with 38" x 36" Stainless Steel Perforated Top Table San Jose CA

Lot Number: 24

Description: 72" x 30" Steel Table with 38" x 36" Stainless Steel Perforated Top Table

Category:

25 Lot of Four (4) Carts with contents San Jose CA

Lot Number: 25

Description: Lot of Four (4) Carts with contents

Category:

26 Amada Model VP 305072 Vipros 357 CNC Turret Punch Press, 30 Ton Capacity, 45 Turret Stations, S/n#35710677 (1994), 460V, 3 Phase, with Amadan 04P-C Controls, Associated Tooling Lot 27 San Jose CA

Lot Number: 26

Description: Amada Model VP 305072 Vipros 357 CNC Turret Punch Press, 30 Ton Capacity, 45 Turret Stations, S/n#35710677 (1994), 460V, 3 Phase, with Amadan 04P-C Controls, Associated Tooling Lot 27

Category:

27 Tooling for Amada Vipros 357 CNC Turret Press, Includes Three (3) Racks and One (1) Cart of Turret Press Tooling San Jose CA

Lot Number: 27

Description: Tooling for Amada Vipros 357 CNC Turret Press, Includes Three (3) Racks and One (1) Cart of Turret Press Tooling

Category:

29 Lateral File Cabinets, Lot of Two (2) Attached 3-Drawer Lateral File Cabinets San Jose CA

Lot Number: 29

Description: Lateral File Cabinets, Lot of Two (2) Attached 3-Drawer Lateral File Cabinets

Category:

30 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG190597L, Also Includes 72" x 36" x 5/8" Welding Table, Gas Mixing Panel and 2-Door Cabinet, no contents San Jose CA

Lot Number: 30

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG190597L, Also Includes 72" x 36" x 5/8" Welding Table, Gas Mixing Panel and 2-Door Cabinet, no contents

Category:

31 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG180525L San Jose CA

Lot Number: 31

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG180525L

Category:

32 Gas Mixing Panel San Jose CA

Lot Number: 32

Description: Gas Mixing Panel

Category:

33 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG180524L, Also Includes 72" x 36" x 5/8" Welding Table, Gas Mixing Panel and 2-Door Cabinet, no contents San Jose CA

Lot Number: 33

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG180524L, Also Includes 72" x 36" x 5/8" Welding Table, Gas Mixing Panel and 2-Door Cabinet, no contents

Category:

34 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG170753L, Also Includes Gas Mixing Panel and Two (2) 2-Door Cabinets, np contents San Jose CA

Lot Number: 34

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG170753L, Also Includes Gas Mixing Panel and Two (2) 2-Door Cabinets, np contents

Category:

35 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG070403L, Also Includes 72" x 36" x 5/8" Welding Table, Gas Mixing Panel and 2-Door Cabinet, no contents San Jose CA

Lot Number: 35

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG070403L, Also Includes 72" x 36" x 5/8" Welding Table, Gas Mixing Panel and 2-Door Cabinet, no contents

Category:

36 Orbitalum AC/DC Orbital TIG, AC Orbital Welder for Welding Aluminum, Includes: Orbimat 300 CA, AC/DC Power Supply with 10.5" Color Display, Orbiweld 170 Enclosed Orbital Fusion Weld Head, Orbiweld 76S Enclosed Orbital Fusion Weld Head, 76" x 36" Welding Table, Gas Mixing Panel, and Rolling Rack with Parts, Accessories and Travel Cases San Jose CA

Lot Number: 36

Description: Orbitalum AC/DC Orbital TIG, AC Orbital Welder for Welding Aluminum, Includes: Orbimat 300 CA, AC/DC Power Supply with 10.5" Color Display, Orbiweld 170 Enclosed Orbital Fusion Weld Head, Orbiweld 76S Enclosed Orbital Fusion Weld Head, 76" x 36" Welding Table, Gas Mixing Panel, and Rolling Rack with Parts, Accessories and Travel Cases

Category:

37 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG130909L San Jose CA

Lot Number: 37

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG130909L

Category:

38 Gas Mixing Panel San Jose CA

Lot Number: 38

Description: Gas Mixing Panel

Category:

39 Lot of Two (2), Gas Mixing Panels San Jose CA

Lot Number: 39

Description: Lot of Two (2), Gas Mixing Panels

Category:

40 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG040474L San Jose CA

Lot Number: 40

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG040474L

Category:

41 Gas Mixing Panel San Jose CA

Lot Number: 41

Description: Gas Mixing Panel

Category:

42 72" x 36" x 5/8" Welding Table San Jose CA

Lot Number: 42

Description: 72" x 36" x 5/8" Welding Table

Category:

43 Gas Mixing Panel San Jose CA

Lot Number: 43

Description: Gas Mixing Panel

Category:

44 72" x 36" x 5/8" Welding Table San Jose CA

Lot Number: 44

Description: 72" x 36" x 5/8" Welding Table

Category:

45 Lot of Two (2), 72" x 30" Stainless Steel Tables San Jose CA

Lot Number: 45

Description: Lot of Two (2), 72" x 30" Stainless Steel Tables

Category:

46 Lot of Two (2), 2-Door Cabinets San Jose CA

Lot Number: 46

Description: Lot of Two (2), 2-Door Cabinets

Category:

47 Tank Rack San Jose CA

Lot Number: 47

Description: Tank Rack

Category:

48 Miller Model Millermatic 350P MIG Welder, S/n#MC441139N San Jose CA

Lot Number: 48

Description: Miller Model Millermatic 350P MIG Welder, S/n#MC441139N

Category:

49 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG180451L San Jose CA

Lot Number: 49

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG180451L

Category:

50 Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG200783L San Jose CA

Lot Number: 50

Description: Miller Model Dynasty 350 AC/DC TIG & Stick Welder, Water Cooled Package, S/n#MG200783L

Category:

51 Miller Model Millermatic 350P MIG Welder, S/n#ME353003N San Jose CA

Lot Number: 51

Description: Miller Model Millermatic 350P MIG Welder, S/n#ME353003N

Category:

Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577