Skyline Solar – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 1 closing every minute in numerical order.

For Example: Lot 1 will start to close at 9:00 PM, Lot 2 will start to close at 9:01 PM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
One Lot Close Per Minute beginning on  Tuesday, July 30th 2013 at 9:00 PM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
1 Benteler Glass Washing Machine; Model: WM4510c-132, includes: 1x10 Bar Spray Section, High Cap Filter, (3) Cylindrical Brush Sections, (6) Upper and Lower Air Knives, Exit and In Feed Conveyor, High Cap Bag Filter, Water filters for each Wash Section, Ionizing Bar, Smart Water Savings Options incl; Conductivity Sensor in Last Tank, Programming/HMI Screen, Detergent Dosing System (NEW NEVER USED) Orig Cost $155,000.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 1

Description: Benteler Glass Washing Machine; Model: WM4510c-132, includes: 1x10 Bar Spray Section, High Cap Filter, (3) Cylindrical Brush Sections, (6) Upper and Lower Air Knives, Exit and In Feed Conveyor, High Cap Bag Filter, Water filters for each Wash Section, Ionizing Bar, Smart Water Savings Options incl; Conductivity Sensor in Last Tank, Programming/HMI Screen, Detergent Dosing System (NEW NEVER USED) Orig Cost $155,000.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

2 Teamtechnik Stringer Model: TT1200 with Laser Soldering, Operating Temp; 18-30 degrees Celsius, Floor Space: 10.5 m x 12.2 m x3.5 m, Installation Height Max 1000 meters, Humidity 20%-60%, weight approx 5000 kg, 3-Phase, 400v, 50hz, Connected Power Consumption 30kva/15kva, Operating Pressure 6 to 8 bar, Constant, Air Consumption per Stringer: Max 1 Nm cubed/min (NEW, NEVER USED) Orig Cost Euro 711,450.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 2

Description: Teamtechnik Stringer Model: TT1200 with Laser Soldering, Operating Temp; 18-30 degrees Celsius, Floor Space: 10.5 m x 12.2 m x3.5 m, Installation Height Max 1000 meters, Humidity 20%-60%, weight approx 5000 kg, 3-Phase, 400v, 50hz, Connected Power Consumption 30kva/15kva, Operating Pressure 6 to 8 bar, Constant, Air Consumption per Stringer: Max 1 Nm cubed/min (NEW, NEVER USED) Orig Cost Euro 711,450.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

3 Burkle Laminator; Model: e.a.sy-Lam 1422-1, Infeed and Outfeed Belt Conveyor Driven, Single Opening, Vacuum Pump, Workpiece Carrier, Working Height 950mm, length approx, 2,300mm, useful width 1,500mm, Technical Data: Useful Area 1,400mm x 2,200mm, opening Stroke Approx 600mm, Useful height 24mm, Final Vacuum Pressure <1 mbar, 400 V, AC, 3 Phase, Operating Voltage General 230V, Emergency Stop. (NEW, NEVER USED) Orig Cost $391,173.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 3

Description: Burkle Laminator; Model: e.a.sy-Lam 1422-1, Infeed and Outfeed Belt Conveyor Driven, Single Opening, Vacuum Pump, Workpiece Carrier, Working Height 950mm, length approx, 2,300mm, useful width 1,500mm, Technical Data: Useful Area 1,400mm x 2,200mm, opening Stroke Approx 600mm, Useful height 24mm, Final Vacuum Pressure <1 mbar, 400 V, AC, 3 Phase, Operating Voltage General 230V, Emergency Stop. (NEW, NEVER USED) Orig Cost $391,173.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

4 Burkle Membrane Press; Model: E-PVM 1324-1, Layup and Loading Station, Single Opening, Useful Area 1330 x 2430mm, Weight approx 8500 kg, Working Height 850mm, Height of Press Chamber 55 mm, Max Pressure 4.0 Bar, Max Diff Pressure 4.8 bar, Final Vac Pressure in Process Room >150mbar, Membrane type Silicone, 400V, AC 3-Phase, Oper Volt General 230v, Freq 50 cycles, Air Humidity 30% up to 60%, Max Height 500m. (NEW, NEVER USED) Orig Cost $479,029.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 4

Description: Burkle Membrane Press; Model: E-PVM 1324-1, Layup and Loading Station, Single Opening, Useful Area 1330 x 2430mm, Weight approx 8500 kg, Working Height 850mm, Height of Press Chamber 55 mm, Max Pressure 4.0 Bar, Max Diff Pressure 4.8 bar, Final Vac Pressure in Process Room >150mbar, Membrane type Silicone, 400V, AC 3-Phase, Oper Volt General 230v, Freq 50 cycles, Air Humidity 30% up to 60%, Max Height 500m. (NEW, NEVER USED) Orig Cost $479,029.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

5 Lot (2) Kuka 6-Axis Robot Automated Encapsulant Dispensers; Nordson dispense equipment with continuous flow shot meters, Nordson standard micro controller, pumps for A and B materials. Additional single solvent pump for purge. (NEW, NEVER USED) Orig Cost $1,439,588.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 5

Description: Lot (2) Kuka 6-Axis Robot Automated Encapsulant Dispensers; Nordson dispense equipment with continuous flow shot meters, Nordson standard micro controller, pumps for A and B materials. Additional single solvent pump for purge. (NEW, NEVER USED) Orig Cost $1,439,588.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

6 Despatch S Series Walk-In Cure Oven; Model: PSC3-23S-1E; 1. Work chamber: 6'-0" wide, 6'-0" deep, 6'-6" high (1,829 x 1,829 x 1,981 mm), Overall main oven body dimensions: 8'-9" wide, 6'-10" deep, 7'-11" high (2,667 W x 2,083 D x 2,413 H mm), Overall dimensions with control box mounted: 9'-9" wide, 7'-8" deep, 11'-11" high (2972 W x 2,413 D x 3,429 H mm), Operating Temperature Range of 150 Degrees F (66 Degrees C) to 500 Degrees F (260 Degrees C). Note: Lowest operating temperature will be approximately 50 Degrees F over ambient temp, 72 KW heater with fast response open coil construction, Recirculating motor/airflow capacity: 5 HP/6,000 CFM. Unique air distribution system for superior temperature uniformity throughout the work chamber, Three mode microprocessor based temperature control instrument with digital readout of operating parameters and accuracy of Plus/Minus0.25% of span plus one degree - Partlow 1400 Plus, Solid state high limit instrument to provide over-temperature protection - Partlow MIC1162, NEMA-1 standard control cabinet, Fully reinforced panel construction with 5" of high grade insulation to minimize heat loss and reduce surface temperatures, Aluminized steel interior oven body panels and ducts (to minimize corrosion at elevated operating temperature), Aluminized steel exterior (oven body panels only), Adjustable air distribution on supply and return assures optimum adjustment for uniform temperatures throughout the chamber, Bi-parting doors with high quality gasket to provide a tight thermal sea, Power Utilities: 380 Volt/3-Phase/50 Hertz (NEW, NEVER USED) Orig Cost $67,497.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 6

Description: Despatch S Series Walk-In Cure Oven; Model: PSC3-23S-1E; 1. Work chamber: 6'-0" wide, 6'-0" deep, 6'-6" high (1,829 x 1,829 x 1,981 mm), Overall main oven body dimensions: 8'-9" wide, 6'-10" deep, 7'-11" high (2,667 W x 2,083 D x 2,413 H mm), Overall dimensions with control box mounted: 9'-9" wide, 7'-8" deep, 11'-11" high (2972 W x 2,413 D x 3,429 H mm), Operating Temperature Range of 150 Degrees F (66 Degrees C) to 500 Degrees F (260 Degrees C). Note: Lowest operating temperature will be approximately 50 Degrees F over ambient temp, 72 KW heater with fast response open coil construction, Recirculating motor/airflow capacity: 5 HP/6,000 CFM. Unique air distribution system for superior temperature uniformity throughout the work chamber, Three mode microprocessor based temperature control instrument with digital readout of operating parameters and accuracy of Plus/Minus0.25% of span plus one degree - Partlow 1400 Plus, Solid state high limit instrument to provide over-temperature protection - Partlow MIC1162, NEMA-1 standard control cabinet, Fully reinforced panel construction with 5" of high grade insulation to minimize heat loss and reduce surface temperatures, Aluminized steel interior oven body panels and ducts (to minimize corrosion at elevated operating temperature), Aluminized steel exterior (oven body panels only), Adjustable air distribution on supply and return assures optimum adjustment for uniform temperatures throughout the chamber, Bi-parting doors with high quality gasket to provide a tight thermal sea, Power Utilities: 380 Volt/3-Phase/50 Hertz (NEW, NEVER USED) Orig Cost $67,497.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

7 Despatch S Series Walk-In Cure Oven; Model: PSC3-23S-1E; 1. Work chamber: 6'-0" wide, 6'-0" deep, 6'-6" high (1,829 x 1,829 x 1,981 mm), Overall main oven body dimensions: 8'-9" wide, 6'-10" deep, 7'-11" high (2,667 W x 2,083 D x 2,413 H mm), Overall dimensions with control box mounted: 9'-9" wide, 7'-8" deep, 11'-11" high (2972 W x 2,413 D x 3,429 H mm), Operating temperature range of 150 Degrees F (66 Degrees C) to 500 Degrees F (260 Degrees C). Note: Lowest operating temperature will be approximately 50 Degrees F over ambient temperature, 72 KW heater with fast response open coil construction, Recirculating motor/airflow capacity: 5-HP/6,000 CFM. Unique air distribution system for superior temperature uniformity throughout the work chamber, Three mode microprocessor based temperature control instrument with digital readout of operating parameters and accuracy of PLus/Minus 0.25% of span plus one degree - Partlow 1400 Plus, Solid state high limit instrument to provide over-temperature protection - Partlow MIC1162, NEMA-1 standard control cabinet, Fully reinforced panel construction with 5" of high grade insulation to minimize heat loss and reduce surface temperatures, Aluminized steel interior oven body panels and ducts (to minimize corrosion at elevated operating temperature), Aluminized steel exterior (oven body panels only), Adjustable air distribution on supply and return assures optimum adjustment for uniform temperatures throughout the chamber, Bi-parting doors with high quality gasket to provide a tight thermal seal, Power Utilities: 380 Volt/3-Phase/50 Hertz (NEW, NEVER USED) Orig Cost $67,497.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 7

Description: Despatch S Series Walk-In Cure Oven; Model: PSC3-23S-1E; 1. Work chamber: 6'-0" wide, 6'-0" deep, 6'-6" high (1,829 x 1,829 x 1,981 mm), Overall main oven body dimensions: 8'-9" wide, 6'-10" deep, 7'-11" high (2,667 W x 2,083 D x 2,413 H mm), Overall dimensions with control box mounted: 9'-9" wide, 7'-8" deep, 11'-11" high (2972 W x 2,413 D x 3,429 H mm), Operating temperature range of 150 Degrees F (66 Degrees C) to 500 Degrees F (260 Degrees C). Note: Lowest operating temperature will be approximately 50 Degrees F over ambient temperature, 72 KW heater with fast response open coil construction, Recirculating motor/airflow capacity: 5-HP/6,000 CFM. Unique air distribution system for superior temperature uniformity throughout the work chamber, Three mode microprocessor based temperature control instrument with digital readout of operating parameters and accuracy of PLus/Minus 0.25% of span plus one degree - Partlow 1400 Plus, Solid state high limit instrument to provide over-temperature protection - Partlow MIC1162, NEMA-1 standard control cabinet, Fully reinforced panel construction with 5" of high grade insulation to minimize heat loss and reduce surface temperatures, Aluminized steel interior oven body panels and ducts (to minimize corrosion at elevated operating temperature), Aluminized steel exterior (oven body panels only), Adjustable air distribution on supply and return assures optimum adjustment for uniform temperatures throughout the chamber, Bi-parting doors with high quality gasket to provide a tight thermal seal, Power Utilities: 380 Volt/3-Phase/50 Hertz (NEW, NEVER USED) Orig Cost $67,497.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

8 C-Tech Automated Welding System with 3 bays; An enclosed WIP bay and dual load/unload bays., Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 8

Description: C-Tech Automated Welding System with 3 bays; An enclosed WIP bay and dual load/unload bays., Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

9 Wagner / Graco Dispense system (NEW, NEVER USED) Orig Cost $23,000.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 9

Description: Wagner / Graco Dispense system (NEW, NEVER USED) Orig Cost $23,000.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

10 Valin PV String Test Station - Sun Simulator (NEW, NEVER USED) Orig Cost $63,000.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 10

Description: Valin PV String Test Station - Sun Simulator (NEW, NEVER USED) Orig Cost $63,000.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

11 Toddco Semi Automated Soldering System (NEW, NEVER USED) Orig Cost $93,177.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 11

Description: Toddco Semi Automated Soldering System (NEW, NEVER USED) Orig Cost $93,177.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

12 Plasmatreat Plasma Treatment System (NEW, NEVER USED) Orig Cost $58,259.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 12

Description: Plasmatreat Plasma Treatment System (NEW, NEVER USED) Orig Cost $58,259.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

13 Erdman Semi Automated 2 Part Encapsulant Dispense System, X and Y axis Servo Drive and Operator Intereface, Wire Mesh Guarding on the sides and rear with Light Curtain in Front, Utilites Required: 220 VAC, 3-Phase, 80 psi, Dynamic Mixer for Two Part Sealant, 5-Gal and 55-Gal Supply Pump designed to Supply sealant and catalyst to Dynamic Mixer, Allen Bradley Servo, JR 2503 Desktop Robot, Working Range- X 510MM, Y 510MM, Z 150mm. LC 1000 Protection Table, 12mm Alum Sheet, Structure Made of 40x40 AL Profile, Back side Fixed, Right and Left Side can be Opened. (NEW, NEVER USED) Orig Cost $142,854.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 13

Description: Erdman Semi Automated 2 Part Encapsulant Dispense System, X and Y axis Servo Drive and Operator Intereface, Wire Mesh Guarding on the sides and rear with Light Curtain in Front, Utilites Required: 220 VAC, 3-Phase, 80 psi, Dynamic Mixer for Two Part Sealant, 5-Gal and 55-Gal Supply Pump designed to Supply sealant and catalyst to Dynamic Mixer, Allen Bradley Servo, JR 2503 Desktop Robot, Working Range- X 510MM, Y 510MM, Z 150mm. LC 1000 Protection Table, 12mm Alum Sheet, Structure Made of 40x40 AL Profile, Back side Fixed, Right and Left Side can be Opened. (NEW, NEVER USED) Orig Cost $142,854.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

14 Erdman Semi Automated 2 Part Encapsulant Dispense System, X and Y axis Servo Drive and Operator Intereface, Wire Mesh Guarding on the sides and rear with Light Curtain in Front, Utilites Required: 220 VAC, 3-Phase, 80 psi, Dynamic Mixer for Two Part Sealant, 5-Gal and 55-Gal Supply Pump designed to Supply sealant and catalyst to Dynamic Mixer, Allen Bradley Servo, JR 2503 Desktop Robot, Working Range- X 510MM, Y 510MM, Z 150mm. LC 1000 Protection Table, 12mm Alum Sheet, Structure Made of 40x40 AL Profile, Back side Fixed, Right and Left Side can be Opened. (NEW, NEVER USED) Orig Cost $135,928.75, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 14

Description: Erdman Semi Automated 2 Part Encapsulant Dispense System, X and Y axis Servo Drive and Operator Intereface, Wire Mesh Guarding on the sides and rear with Light Curtain in Front, Utilites Required: 220 VAC, 3-Phase, 80 psi, Dynamic Mixer for Two Part Sealant, 5-Gal and 55-Gal Supply Pump designed to Supply sealant and catalyst to Dynamic Mixer, Allen Bradley Servo, JR 2503 Desktop Robot, Working Range- X 510MM, Y 510MM, Z 150mm. LC 1000 Protection Table, 12mm Alum Sheet, Structure Made of 40x40 AL Profile, Back side Fixed, Right and Left Side can be Opened. (NEW, NEVER USED) Orig Cost $135,928.75, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

15 Everqueen Industries Bake Oven; Model: CKK Orig Cost $17,500.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer
Sold at Skyline Solar on 7/30/2013
Dongguan City, Guangdong, China

Lot Number: 15

Description: Everqueen Industries Bake Oven; Model: CKK Orig Cost $17,500.00, Please note: Any Domestic Sales may be subject to a VAT tax or local taxes. Any buyer exporting out of China, will have to export through Hong Kong and pay for any applicable costs with that transfer

Category:

 
Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577