i3 electronics #2 – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 2 closing every minute in numerical order.

For Example: Lots 1 and 2 will start to close at 10:00 AM, Lots 3 and 4 will start to close at 10:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
Two Lots Close Per Minute beginning on  Friday, May 02nd 2014 at 10:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
500 2004 Hitachi Model ND-1V284E 4-Pod Independent CNC Drilling Machine, 160k RPM Water Cooled Spindles,H Mark 30-V Controls, Controlled Depth Drilling, 24" x 32" Max Panel Size, (4) Daikin Model AKZ147-D16817 Oil Cooling Unit, (1) SMC Model IDF11E Air Dryer, s/n K111324051, Asset # E0030, Located in 47A3
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 500

Description: 2004 Hitachi Model ND-1V284E 4-Pod Independent CNC Drilling Machine, 160k RPM Water Cooled Spindles,H Mark 30-V Controls, Controlled Depth Drilling, 24" x 32" Max Panel Size, (4) Daikin Model AKZ147-D16817 Oil Cooling Unit, (1) SMC Model IDF11E Air Dryer, s/n K111324051, Asset # E0030, Located in 47A3

Category:

501 2004 Hitachi Model ND-1V284E 4-Pod Independent CNC Drilling Machine, 160k RPM Water Cooled Spindles,H Mark 30-V Controls, Controlled Depth Drilling, 24" x 32" Max Panel Size, (4) Daikin Model AKZ147-D16817 Oil Cooling Unit, (1) SMC Model IDF11E Air Dryer, s/n K111324011, Asset # E0029, Located in 47A3
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 501

Description: 2004 Hitachi Model ND-1V284E 4-Pod Independent CNC Drilling Machine, 160k RPM Water Cooled Spindles,H Mark 30-V Controls, Controlled Depth Drilling, 24" x 32" Max Panel Size, (4) Daikin Model AKZ147-D16817 Oil Cooling Unit, (1) SMC Model IDF11E Air Dryer, s/n K111324011, Asset # E0029, Located in 47A3

Category:

504 Dynamotion Single Spindle Drill, Model MD1100 w/ Depth Control, Sieb & Meyer CNC 4100 Controls, Sieb & Meyer Power Supply, 100k RPM Spindle, s/n M160, Asset # 23876, Located in 47A3
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 504

Description: Dynamotion Single Spindle Drill, Model MD1100 w/ Depth Control, Sieb & Meyer CNC 4100 Controls, Sieb & Meyer Power Supply, 100k RPM Spindle, s/n M160, Asset # 23876, Located in 47A3

Category:

505 Dynamotion Single Spindle Drill, Model 1100M with Depth Control, Sieb & Meyer System CNC 44.0 Controller, Sieb & Meyer Model 21.49 Control, s/n M134, Asset # 23663, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 505

Description: Dynamotion Single Spindle Drill, Model 1100M with Depth Control, Sieb & Meyer System CNC 44.0 Controller, Sieb & Meyer Model 21.49 Control, s/n M134, Asset # 23663, Building 47-2, Location Old Drill ROOM

Category:

506 Dynamotion Single Spindle Drill, Model 1100M, Sieb & Meyer System CNC 44.0 Controller, Sieb & Meyer Model 21.49 Power Supply, s/n M133, Asset # 23662, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 506

Description: Dynamotion Single Spindle Drill, Model 1100M, Sieb & Meyer System CNC 44.0 Controller, Sieb & Meyer Model 21.49 Power Supply, s/n M133, Asset # 23662, Building 47-2, Location Old Drill ROOM

Category:

507 Dynamotion Single Spindle Drill, Model 1100M, Sieb & Meyer System CNC 44.0 Controller, Sieb & Meyer Model 21.49 Power Supply, s/n M132, Asset # 23653, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 507

Description: Dynamotion Single Spindle Drill, Model 1100M, Sieb & Meyer System CNC 44.0 Controller, Sieb & Meyer Model 21.49 Power Supply, s/n M132, Asset # 23653, Building 47-2, Location Old Drill ROOM

Category:

508 Dynamotion Single Spindle Drill, Model 1100M, Sieb & Meyer System CNC 44.0 Controller, Sieb & Meyer Model 21.49 Power Supply, s/n M127, Asset # 23415, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 508

Description: Dynamotion Single Spindle Drill, Model 1100M, Sieb & Meyer System CNC 44.0 Controller, Sieb & Meyer Model 21.49 Power Supply, s/n M127, Asset # 23415, Building 47-2, Location Old Drill ROOM

Category:

509 Dynamotion Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD007, Asset # 23880, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 509

Description: Dynamotion Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD007, Asset # 23880, Building 47-2, Location Old Drill ROOM

Category:

510 Dynamotion Single Spindle Drill, Model DRM1100, w/ Sieb & Meyer System CNC 44.00 Controls, Sieb & Meyer 21.49 Power Supply, s/n M128, Asset # 23548, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 510

Description: Dynamotion Single Spindle Drill, Model DRM1100, w/ Sieb & Meyer System CNC 44.00 Controls, Sieb & Meyer 21.49 Power Supply, s/n M128, Asset # 23548, Building 47-2, Location Old Drill ROOM

Category:

511 Dynamotion Single Spindle Drill, Model DRM1100, w/ Sieb & Meyer System CNC 44.00 Controls, Sieb & Meyer 21.49 Power Supply, s/n M129, Asset # 23549, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 511

Description: Dynamotion Single Spindle Drill, Model DRM1100, w/ Sieb & Meyer System CNC 44.00 Controls, Sieb & Meyer 21.49 Power Supply, s/n M129, Asset # 23549, Building 47-2, Location Old Drill ROOM

Category:

512 Dynamotion Single Spindle Drill, Model DRM1100, w/ Sieb & Meyer System CNC 44.00 Controls, Sieb & Meyer 21.49 Power Supply, s/n M130, Asset # 23550, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 512

Description: Dynamotion Single Spindle Drill, Model DRM1100, w/ Sieb & Meyer System CNC 44.00 Controls, Sieb & Meyer 21.49 Power Supply, s/n M130, Asset # 23550, Building 47-2, Location Old Drill ROOM

Category:

514 Dynamotion Single Spindle Drill, Model MD1100, w/ Depth Control, Sieb & Meyer System CNC 44 Controls, Sieb & Meyer 2149 Power Supply, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 514

Description: Dynamotion Single Spindle Drill, Model MD1100, w/ Depth Control, Sieb & Meyer System CNC 44 Controls, Sieb & Meyer 2149 Power Supply, Building 47-2, Location Old Drill ROOM

Category:

515 ESI Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD042, Asset # 24159, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 515

Description: ESI Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD042, Asset # 24159, Building 47-2, Location Old Drill ROOM

Category:

516 ESI Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD040, Asset # 24160, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 516

Description: ESI Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD040, Asset # 24160, Building 47-2, Location Old Drill ROOM

Category:

516A ESI Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD043, Asset # 24161, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 516A

Description: ESI Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD043, Asset # 24161, Building 47-2, Location Old Drill ROOM

Category:

517 ESI Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD053, Asset # 24292, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 517

Description: ESI Single Spindle Drill, Model MD100, w/ Built In Controller, s/n MD053, Asset # 24292, Building 47-2, Location Old Drill ROOM

Category:

519 DYNAMOTION 4 Spindle Drill , Model DM9400, w/ Sieb & Meyer System CNC 45.0 Controller, Sieb & Meyer CNC 45.01.3.1 Data Reader, Sieb & Meyer 21.45.1 Power Supply, s/n 792B5, Asset # 23845, w/ Associated Transformer, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 519

Description: DYNAMOTION 4 Spindle Drill , Model DM9400, w/ Sieb & Meyer System CNC 45.0 Controller, Sieb & Meyer CNC 45.01.3.1 Data Reader, Sieb & Meyer 21.45.1 Power Supply, s/n 792B5, Asset # 23845, w/ Associated Transformer, Building 47-2, Location Old Drill ROOM

Category:

522 DYNAMOTION 4 Spindle Drill , Model DM9400, w/ Sieb & Meyer System CNC 45.0 Controller, Sieb & Meyer CNC 45.01.3.1 Data Reader, Sieb & Meyer 21.45.1 Power Supply, s/n 781, Asset # 23554, w/ Associated Transformer, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 522

Description: DYNAMOTION 4 Spindle Drill , Model DM9400, w/ Sieb & Meyer System CNC 45.0 Controller, Sieb & Meyer CNC 45.01.3.1 Data Reader, Sieb & Meyer 21.45.1 Power Supply, s/n 781, Asset # 23554, w/ Associated Transformer, Building 47-2, Location Old Drill ROOM

Category:

523 DYNAMOTION 4 Spindle Drill , Model DM9400, w/ Sieb & Meyer System CNC 45.0 Controller, Sieb & Meyer CNC 45.01.3.1 Data Reader, Sieb & Meyer 21.45.1 Power Supply, s/n 786, Asset # 23642, w/ Associated Transformer, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 523

Description: DYNAMOTION 4 Spindle Drill , Model DM9400, w/ Sieb & Meyer System CNC 45.0 Controller, Sieb & Meyer CNC 45.01.3.1 Data Reader, Sieb & Meyer 21.45.1 Power Supply, s/n 786, Asset # 23642, w/ Associated Transformer, Building 47-2, Location Old Drill ROOM

Category:

524 DYNAMOTION 4 Spindle Drill , Model DM9400, w/ Sieb & Meyer System CNC 45.0 Controller, Sieb & Meyer CNC 45.01.3.1 Data Reader, Sieb & Meyer 21.45.1 Power Supply, s/n 791, Asset # 23657, w/ Associated Transformer, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 524

Description: DYNAMOTION 4 Spindle Drill , Model DM9400, w/ Sieb & Meyer System CNC 45.0 Controller, Sieb & Meyer CNC 45.01.3.1 Data Reader, Sieb & Meyer 21.45.1 Power Supply, s/n 791, Asset # 23657, w/ Associated Transformer, Building 47-2, Location Old Drill ROOM

Category:

526 ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD016, Asset # 23927, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 526

Description: ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD016, Asset # 23927, Building 47-2, Location Old Drill ROOM

Category:

535 ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD047, Asset # 24162, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 535

Description: ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD047, Asset # 24162, Building 47-2, Location Old Drill ROOM

Category:

537 ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD034, Asset # 24040, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 537

Description: ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD034, Asset # 24040, Building 47-2, Location Old Drill ROOM

Category:

538 ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD031, Asset # 24041, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 538

Description: ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD031, Asset # 24041, Building 47-2, Location Old Drill ROOM

Category:

540 ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD019, Asset # 23944, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 540

Description: ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD019, Asset # 23944, Building 47-2, Location Old Drill ROOM

Category:

541 ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD018, Asset # 23943, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 541

Description: ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD018, Asset # 23943, Building 47-2, Location Old Drill ROOM

Category:

542 ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD027, Asset # 24019, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 542

Description: ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD027, Asset # 24019, Building 47-2, Location Old Drill ROOM

Category:

550 ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD021, Asset # 23970, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 550

Description: ESI Single Spindle Mechanical Drill, Model MD-100, w/ Built In Card Access Controller, s/n MD021, Asset # 23970, Building 47-2, Location Old Drill ROOM

Category:

552 GS View Engineering Model Voyager V1818 Non Contact Video Coordinate Measuring Machine, s/n 1.80098E+11, Asset # 23916, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 552

Description: GS View Engineering Model Voyager V1818 Non Contact Video Coordinate Measuring Machine, s/n 1.80098E+11, Asset # 23916, Building 47-2, Location Old Drill ROOM

Category:

553 OGP Contour Optical Comparator Projector, Model Opticom Qualifier 14B w/ Digital X, Y, Axis Display, Magnification Adjustment, Approx. 24 Screen. s/n n/a, Building 47-2, Location Old Drill ROOM
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 553

Description: OGP Contour Optical Comparator Projector, Model Opticom Qualifier 14B w/ Digital X, Y, Axis Display, Magnification Adjustment, Approx. 24 Screen. s/n n/a, Building 47-2, Location Old Drill ROOM

Category:

554 View Engineering Model PRECIS 3000 Non Contact Video Coordinate Measuring Machine w/ Associated Computer, Cables, Approx. 36 x 36 Table, Asset # 22811, s/n 124
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 554

Description: View Engineering Model PRECIS 3000 Non Contact Video Coordinate Measuring Machine w/ Associated Computer, Cables, Approx. 36 x 36 Table, Asset # 22811, s/n 124

Category:

554a Cyber Optics Model Cyber San Cobra Laser Profilameter w/ Cyberoptics Head, Model DRS-500, CCD Digital Camera w/ Optem Zoom 65 Lense, Newport Motion Controller, Pneumatic Slide Table w/ Granite Base, Pentium Computer, Panasonic TM990 Video Monitor, Fostec Light Source, Asset # 23922, Location Small Drill Room 47-1
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 554a

Description: Cyber Optics Model Cyber San Cobra Laser Profilameter w/ Cyberoptics Head, Model DRS-500, CCD Digital Camera w/ Optem Zoom 65 Lense, Newport Motion Controller, Pneumatic Slide Table w/ Granite Base, Pentium Computer, Panasonic TM990 Video Monitor, Fostec Light Source, Asset # 23922, Location Small Drill Room 47-1

Category:

555 Excellon Model EX132 Single Spindle Driller-Router, w/ Excellon Automation CNC-6 Controls, Asset # 22624, s/n 1.30
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 555

Description: Excellon Model EX132 Single Spindle Driller-Router, w/ Excellon Automation CNC-6 Controls, Asset # 22624, s/n 1.30

Category:

556 Lot of (24) Magazine Boxes w/ Magazines
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 556

Description: Lot of (24) Magazine Boxes w/ Magazines

Category:

557 Lot of (24) Magazine Boxes w/ Magazines
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 557

Description: Lot of (24) Magazine Boxes w/ Magazines

Category:

560 Lot of (20) Magazine Cases w/ Magazines
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 560

Description: Lot of (20) Magazine Cases w/ Magazines

Category:

562 Lot of (15) Magazine Cases w/ Magazines
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 562

Description: Lot of (15) Magazine Cases w/ Magazines

Category:

565 Lot of (14) Magazine Cases w/ Magazines, (2) Boxes of Magazines
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 565

Description: Lot of (14) Magazine Cases w/ Magazines, (2) Boxes of Magazines

Category:

566 Grieve Oven, Model TBH-500, Max. Temp. 600 Degrees F, w/ Partlow MRC7000 Chart Recorder, Asset # 13491, S/N 640471
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 566

Description: Grieve Oven, Model TBH-500, Max. Temp. 600 Degrees F, w/ Partlow MRC7000 Chart Recorder, Asset # 13491, S/N 640471

Category:

567 Argon Service Model Hydra 2 Silk Screening Table, Screen Size Approx. 36 inch x 30 inch, w/ Stainless Steel Vented Ink/Tool Station, Asset # 18336, S/N 9297843
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 567

Description: Argon Service Model Hydra 2 Silk Screening Table, Screen Size Approx. 36 inch x 30 inch, w/ Stainless Steel Vented Ink/Tool Station, Asset # 18336, S/N 9297843

Category:

568 2000 Circuit Automation Model DP2500V2-1 Vertical Solder Screener, w/ Touchscreen Control Panel, ID # 24271, Asset # 24271, S/N DP-2500-80226
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 568

Description: 2000 Circuit Automation Model DP2500V2-1 Vertical Solder Screener, w/ Touchscreen Control Panel, ID # 24271, Asset # 24271, S/N DP-2500-80226

Category:

572 Orbotech Model Discovery 8 HR AOI Tool/Tester, Asset # E0185, S/N P1053047
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 572

Description: Orbotech Model Discovery 8 HR AOI Tool/Tester, Asset # E0185, S/N P1053047

Category:

574 Everett Charles Technologies Series 9090 Fix Head Double Sided-Double Densisty Bare Board Grid Tester, w/ IBM 300GL Computer, Simco Ionizing Gun, Asset # 23625, S/N T-9090-074
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 574

Description: Everett Charles Technologies Series 9090 Fix Head Double Sided-Double Densisty Bare Board Grid Tester, w/ IBM 300GL Computer, Simco Ionizing Gun, Asset # 23625, S/N T-9090-074

Category:

575 Struers Knuth-2 Rotor Polishing Station, Asset # 22715, S/N 3831921
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 575

Description: Struers Knuth-2 Rotor Polishing Station, Asset # 22715, S/N 3831921

Category:

575a Nikon Stereo Zoom Microscope Model Optiphot w/ 10X Eyepieces, 5X, 10X, 20X, 40X Objectives, (1) ILK Micro Code Precision Digital Positioner, Model 7098M w/ Nikon Light Source
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 575a

Description: Nikon Stereo Zoom Microscope Model Optiphot w/ 10X Eyepieces, 5X, 10X, 20X, 40X Objectives, (1) ILK Micro Code Precision Digital Positioner, Model 7098M w/ Nikon Light Source

Category:

576 Nikon Stereozoom Microscope, Model SMZ-B2, w/ 10X Eyepieces, Adjustable Objective from .8 through 5X, w/ Light Source, Adjustable Height Table w/ Base Lighting
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 576

Description: Nikon Stereozoom Microscope, Model SMZ-B2, w/ 10X Eyepieces, Adjustable Objective from .8 through 5X, w/ Light Source, Adjustable Height Table w/ Base Lighting

Category:

577 Meiji Model EMZ Stereozoom Microscope, w/ 10X Eyepieces, Adjustable Objective from .7X through 4.5X, w/ Overhead Mounting Bracket, Work Bench
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 577

Description: Meiji Model EMZ Stereozoom Microscope, w/ 10X Eyepieces, Adjustable Objective from .7X through 4.5X, w/ Overhead Mounting Bracket, Work Bench

Category:

578 EBT Robotic NLC Tester, Model 1770, w/ Associated Control Boxes, S/N 3, Asset # 21049
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 578

Description: EBT Robotic NLC Tester, Model 1770, w/ Associated Control Boxes, S/N 3, Asset # 21049

Category:

579 EBT Robotic NLC Tester, Model 1770, w/ Associated Control Boxes, S/N 2, Asset # 21048
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 579

Description: EBT Robotic NLC Tester, Model 1770, w/ Associated Control Boxes, S/N 2, Asset # 21048

Category:

580 Radoll Bevelmate Model 035, Asset # 23250, S/N 23A
Sold at i3 electronics #2 on 5/2/2014
Endicott, NY

Lot Number: 580

Description: Radoll Bevelmate Model 035, Asset # 23250, S/N 23A

Category:

Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577