Eastern Bioplastics – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 2 closing every minute in numerical order.

For Example: Lots 1 and 2 will start to close at 11:00 AM, Lots 3 and 4 will start to close at 11:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
Two Lots Close Per Minute beginning on  Friday, December 16th 2016 at 11:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
Please Note: Some Bidders are currently experiencing intermittent issues with the automatic updating of bid information. TBG recommends manually refreshing your browser every few minutes to ensure that you have the most up-to-date information.
101 Machine Lockout Kit With Case
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 101

Description: Machine Lockout Kit With Case

Category:

104 Gastech Calibration Kit For Sample Drawing Instrument And Gas Tech Personal Four-Way Alarm, Model GX - 86
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 104

Description: Gastech Calibration Kit For Sample Drawing Instrument And Gas Tech Personal Four-Way Alarm, Model GX - 86

Category:

105 SPM Instrument, Bearing Analysis System, Model BAS - 10
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 105

Description: SPM Instrument, Bearing Analysis System, Model BAS - 10

Category:

106 General Radio Company Stroboscopic Type 1531
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 106

Description: General Radio Company Stroboscopic Type 1531

Category:

107 H E Adam CPW Plus35, Scale 75 Pound Capacity, D Equals 0.02lb.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 107

Description: H E Adam CPW Plus35, Scale 75 Pound Capacity, D Equals 0.02lb.

Category:

108 Lindberg Blue M Mechanical Oven M01420a, 120 V, 1 Kw, 9.2 Amp, Temp Range 300 Degrees C Max - 40 C Min Serial Number Z01H - 411832 - ZH, Interior Size Approximately 9 1/2 Inches Tall By 13 Inches Wide By 15 1/2 Inches Deep
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 108

Description: Lindberg Blue M Mechanical Oven M01420a, 120 V, 1 Kw, 9.2 Amp, Temp Range 300 Degrees C Max - 40 C Min Serial Number Z01H - 411832 - ZH, Interior Size Approximately 9 1/2 Inches Tall By 13 Inches Wide By 15 1/2 Inches Deep

Category:

109 Intelligent Weighing Technologies, Intell-Lab Balance, Max 160 G /0.001g, Serial Number IT1100445.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 109

Description: Intelligent Weighing Technologies, Intell-Lab Balance, Max 160 G /0.001g, Serial Number IT1100445.

Category:

110 Midwest Instrument Differential Flow Test Kit, Model 820
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 110

Description: Midwest Instrument Differential Flow Test Kit, Model 820

Category:

111 Testing Machines Inc. Melt Flow Index Or Type X NR - 400, Temp Range 120-450 C, Serial Number 1010028, New 10/2010, With Case And Weights.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 111

Description: Testing Machines Inc. Melt Flow Index Or Type X NR - 400, Temp Range 120-450 C, Serial Number 1010028, New 10/2010, With Case And Weights.

Category:

112 International Equipment Notch Cutter New In 2011, Serial Number 270
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 112

Description: International Equipment Notch Cutter New In 2011, Serial Number 270

Category:

113 Testing Machines Inc. Monitor/Impact Tester, Model 43-02-01-001, Serial Number 72917-01, 120 V, With Manual And Stand.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 113

Description: Testing Machines Inc. Monitor/Impact Tester, Model 43-02-01-001, Serial Number 72917-01, 120 V, With Manual And Stand.

Category:

114 Testo Metric M 500-25 CT, Type DBBMTCL, Tensile Tester,1000 Kg, Serial Number 35287, With User Manual And Stand.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 114

Description: Testo Metric M 500-25 CT, Type DBBMTCL, Tensile Tester,1000 Kg, Serial Number 35287, With User Manual And Stand.

Category:

114A Wilson Hardness Tester Model 4JR, S/N 1955
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 114A

Description: Wilson Hardness Tester Model 4JR, S/N 1955

Category:

114B Granite Surface Plate 12x12x3.25"
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 114B

Description: Granite Surface Plate 12x12x3.25"

Category:

114C Granite Surface Plate 18x24x3.25" Precision Granite CO. Marked Ref Only, Grade B 10/3/1998
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 114C

Description: Granite Surface Plate 18x24x3.25" Precision Granite CO. Marked Ref Only, Grade B 10/3/1998

Category:

114D Granite Surface Plate 24x36x4.25"
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 114D

Description: Granite Surface Plate 24x36x4.25"

Category:

115 Celestron Microscope Approximately 3 1/2 Inch Screen 4X/10X/40X, SD/MMC, Adjustable 2048 X 1536 Maximum Resolution Above And Below Stage Lighting.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 115

Description: Celestron Microscope Approximately 3 1/2 Inch Screen 4X/10X/40X, SD/MMC, Adjustable 2048 X 1536 Maximum Resolution Above And Below Stage Lighting.

Category:

116 Clausing Drill Press Model 2277, Serial Number 526373, 1 1/2-.75 Hip 460 V Three-Phase, 20 Inch Swing, Spindle Speeds 150-2000.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 116

Description: Clausing Drill Press Model 2277, Serial Number 526373, 1 1/2-.75 Hip 460 V Three-Phase, 20 Inch Swing, Spindle Speeds 150-2000.

Category:

117 Microcut 837 Variable Speed Vertical Milling Machine, 10 X 48" Bed With Accu - Rite DRO, Part Number 619 035-12, Serial Number 25 676 400, Spindle Speeds 60-4200, 230/460 V Three Phase.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 117

Description: Microcut 837 Variable Speed Vertical Milling Machine, 10 X 48" Bed With Accu - Rite DRO, Part Number 619 035-12, Serial Number 25 676 400, Spindle Speeds 60-4200, 230/460 V Three Phase.

Category:

117A Mubea Ironworker KBL Optima, Model KBL Size 88-6 Serial, #135A/37058F/24 With Assorted Dies
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 117A

Description: Mubea Ironworker KBL Optima, Model KBL Size 88-6 Serial, #135A/37058F/24 With Assorted Dies

Category:

126 1500 Gallon Poly Tank And Mezzanine Was Used With Water Only. Mezzanine Approximately 9' X 81" By 104 Inches Tall. Water Supply For Wash System.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 126

Description: 1500 Gallon Poly Tank And Mezzanine Was Used With Water Only. Mezzanine Approximately 9' X 81" By 104 Inches Tall. Water Supply For Wash System.

Category:

128 Mezzanine System Assorted Heights, Mezzanine Approximately 10'5" To Platform Approximately 15'6" By 17'6" With Five Steps Down To A Section Approximately 7 Foot Tall, 5' X 18 With 32" X 112" Walkway To 32 Inch Wide By 80 Inch Incline Walkway To A Section Approximately 12' X 16' With Stairs To Floor And Approximately 7'10" Tall To Deck. Items On Mezzanine Not Included. Removal Should Be Coordinated With Buyers Of Lots On The Mezzanine
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 128

Description: Mezzanine System Assorted Heights, Mezzanine Approximately 10'5" To Platform Approximately 15'6" By 17'6" With Five Steps Down To A Section Approximately 7 Foot Tall, 5' X 18 With 32" X 112" Walkway To 32 Inch Wide By 80 Inch Incline Walkway To A Section Approximately 12' X 16' With Stairs To Floor And Approximately 7'10" Tall To Deck. Items On Mezzanine Not Included. Removal Should Be Coordinated With Buyers Of Lots On The Mezzanine

Category:

129 LR Systems Three Color Blender Hopper Feeder With WSB - 100 Controls And Syntron Magnetic Feeders Model F - T01 Agitator And Blower, (Located On Mezzanine)
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 129

Description: LR Systems Three Color Blender Hopper Feeder With WSB - 100 Controls And Syntron Magnetic Feeders Model F - T01 Agitator And Blower, (Located On Mezzanine)

Category:

130 (2) Hoppers On Mezzanine One Process Control Hopper With Blower & Agitator Main Body Approximately 5 Foot Diameter With Blower, Second Hopper Is Approximately 45 Inches In Diameter With Top And Bottom Blower, (Located On Mezzanine)
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 130

Description: (2) Hoppers On Mezzanine One Process Control Hopper With Blower & Agitator Main Body Approximately 5 Foot Diameter With Blower, Second Hopper Is Approximately 45 Inches In Diameter With Top And Bottom Blower, (Located On Mezzanine)

Category:

130A AEC Whitlock Dryer, (Located On Mezzanine)
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 130A

Description: AEC Whitlock Dryer, (Located On Mezzanine)

Category:

131 3 Inch Wide Conveyor, Plastic Modular Belt Approximately 7 Foot Long With Dayton Model 1LPN6 AC Gear Motor, (Located On Mezzanine)
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 131

Description: 3 Inch Wide Conveyor, Plastic Modular Belt Approximately 7 Foot Long With Dayton Model 1LPN6 AC Gear Motor, (Located On Mezzanine)

Category:

132 Smoot Rotary Airlock Valve 47-26, (Located On Mezzanine)
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 132

Description: Smoot Rotary Airlock Valve 47-26, (Located On Mezzanine)

Category:

133 LR Systems Blender With Five Hoppers And WSB Controls Syntron Magnetic Feeders Dropping To A Hopper With Screw Feed
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 133

Description: LR Systems Blender With Five Hoppers And WSB Controls Syntron Magnetic Feeders Dropping To A Hopper With Screw Feed

Category:

134 Hopper (Tank 2) Approximately 76 Inch Diameter, (Located On Mezzanine)
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 134

Description: Hopper (Tank 2) Approximately 76 Inch Diameter, (Located On Mezzanine)

Category:

135 Hopper Feeding Custom Valve With Tigear Motor, Screw Feed, (Located On Mezzanine)
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 135

Description: Hopper Feeding Custom Valve With Tigear Motor, Screw Feed, (Located On Mezzanine)

Category:

136 Nissei 40 Ton Injection Molder, Model PS40E5ASE, Serial Number E04K568, 230/460 Volt, Three-Phase, Heater 4.3 Kw, Motor 7.5 Kw, CTRL N8F 1991 Adjustable Shot Size.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 136

Description: Nissei 40 Ton Injection Molder, Model PS40E5ASE, Serial Number E04K568, 230/460 Volt, Three-Phase, Heater 4.3 Kw, Motor 7.5 Kw, CTRL N8F 1991 Adjustable Shot Size.

Category:

137 1992 Van Dorn Injection Molding Machine, Model 85-RS-5F-HT, S/N 354 W/ Pathfinder Controls, 85-Ton, Shot Size 5 Oz, Tiebar Distance 406 X 345 Mm, Platen 518 X 579 Mm, May Daylight 711 Mm, 230/460 Volts
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 137

Description: 1992 Van Dorn Injection Molding Machine, Model 85-RS-5F-HT, S/N 354 W/ Pathfinder Controls, 85-Ton, Shot Size 5 Oz, Tiebar Distance 406 X 345 Mm, Platen 518 X 579 Mm, May Daylight 711 Mm, 230/460 Volts

Category:

138 Nissei Injection Molding Machine 220 Ton, Model FS210S50ASE, Serial Number S21049, 230/460 V, Heater 14.8 Kw, Motor 30 Kw, 1994, Screw Diameter 63 Mm, Injection Capacity 569 G, Mold Thickness 265 Mm With Spacers, 500 Mm Without Spacers, Daylight Open 815 Mm With Spacer, 1050 Mm Without Spacer, Distance Between Tie Rods 570 X 570 Mm Platen Size 825 X 825 Mm, NC 9000 G Controls.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 138

Description: Nissei Injection Molding Machine 220 Ton, Model FS210S50ASE, Serial Number S21049, 230/460 V, Heater 14.8 Kw, Motor 30 Kw, 1994, Screw Diameter 63 Mm, Injection Capacity 569 G, Mold Thickness 265 Mm With Spacers, 500 Mm Without Spacers, Daylight Open 815 Mm With Spacer, 1050 Mm Without Spacer, Distance Between Tie Rods 570 X 570 Mm Platen Size 825 X 825 Mm, NC 9000 G Controls.

Category:

139 Superior MPM Extruder, Single Screw, Serial Number S - 3854, New September 1990, Lab Extruder, With Koellmann Gear Size PEZS 14, Rated 12.5 Hp.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 139

Description: Superior MPM Extruder, Single Screw, Serial Number S - 3854, New September 1990, Lab Extruder, With Koellmann Gear Size PEZS 14, Rated 12.5 Hp.

Category:

140 Leistrtiz Twin Screw Extruder ZSE 67 GL Co-Rotation Axial Distance 59 Mm, Screw Diameter 67 Mm, Screw Length 34 L/D, 70 Kw Motor, Screw Speed 0 To 300 RPM, Heating 33 Kw With Control Panel And Transformer
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 140

Description: Leistrtiz Twin Screw Extruder ZSE 67 GL Co-Rotation Axial Distance 59 Mm, Screw Diameter 67 Mm, Screw Length 34 L/D, 70 Kw Motor, Screw Speed 0 To 300 RPM, Heating 33 Kw With Control Panel And Transformer

Category:

142A Dog Bone Mold Was Used For Test Bars
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 142A

Description: Dog Bone Mold Was Used For Test Bars

Category:

142B 3" Pot Mold
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 142B

Description: 3" Pot Mold

Category:

142C 4" Pot Mold
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 142C

Description: 4" Pot Mold

Category:

143 AEC Chilling System, Milacron Cooling Tank And Outdoor Cooling Tower.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 143

Description: AEC Chilling System, Milacron Cooling Tank And Outdoor Cooling Tower.

Category:

144 Centerline Mark 2 Eagle, Serial Number C - 5032, Sprue Picker
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 144

Description: Centerline Mark 2 Eagle, Serial Number C - 5032, Sprue Picker

Category:

145 SU-TA Automation LTD. Automatic Unloader/Sprue Picker Model TA 800s, New 1997, Manufacturer #10409, Dual Arm.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 145

Description: SU-TA Automation LTD. Automatic Unloader/Sprue Picker Model TA 800s, New 1997, Manufacturer #10409, Dual Arm.

Category:

146 CMC Hydraulic Pallet Tipper /Dumping Loader Hopper With Bin And IMS Push Pull Pump, Bin Approximately 52 X 52".
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 146

Description: CMC Hydraulic Pallet Tipper /Dumping Loader Hopper With Bin And IMS Push Pull Pump, Bin Approximately 52 X 52".

Category:

147 Hopper With Bagging Station, E - Troll, DC Control, Controls Volume And Dispensing Hopper Diameter Approximately 30" X 48" Tall.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 147

Description: Hopper With Bagging Station, E - Troll, DC Control, Controls Volume And Dispensing Hopper Diameter Approximately 30" X 48" Tall.

Category:

148 Stainless Steel Cleated Conveyor Approximately 5 3/4 Inches Wide By 15 Foot Long With Hopper Bin With Approximately 9" X 17' Screw Incline Conveyor To Hopper/Bagging Station With IMS Granulator, And Mezzanine Deck Approximately 36" X 72" Not Counting Steps 41 Inch Tall Deck.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 148

Description: Stainless Steel Cleated Conveyor Approximately 5 3/4 Inches Wide By 15 Foot Long With Hopper Bin With Approximately 9" X 17' Screw Incline Conveyor To Hopper/Bagging Station With IMS Granulator, And Mezzanine Deck Approximately 36" X 72" Not Counting Steps 41 Inch Tall Deck.

Category:

149 Stainless Steel Cleated Humpback Conveyor Approximately 9 Inch Wide With Iron Horse Speed Reducer Size 175 Ratio 40
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 149

Description: Stainless Steel Cleated Humpback Conveyor Approximately 9 Inch Wide With Iron Horse Speed Reducer Size 175 Ratio 40

Category:

149A Dust Collector System Consisting Of Process Control Model VEIOENLNO1 Serial, #15772B, 460 V Three Phase, New 2/28/90 With Flex Clean Hopper/Collector.
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 149A

Description: Dust Collector System Consisting Of Process Control Model VEIOENLNO1 Serial, #15772B, 460 V Three Phase, New 2/28/90 With Flex Clean Hopper/Collector.

Category:

150 Conair Temp Pro Model TC1 - DI, 480 V Three Phase, Water Temperature Controller/Mold Temp Controller, 9 Kw, Operating Range 32F - 250 F, Serial Number 90J037
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 150

Description: Conair Temp Pro Model TC1 - DI, 480 V Three Phase, Water Temperature Controller/Mold Temp Controller, 9 Kw, Operating Range 32F - 250 F, Serial Number 90J037

Category:

151 Conair Tempro Dual Zone Mold Water Temperature Controller Model TC2 - DI, Serial Number 94K089, 460 V, Three-Phase, Heater 9 Kw Each
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 151

Description: Conair Tempro Dual Zone Mold Water Temperature Controller Model TC2 - DI, Serial Number 94K089, 460 V, Three-Phase, Heater 9 Kw Each

Category:

152 (2) Fast Heat KSX10301SJ Conductor Series, Modular Temperature Controllers On Stand 240 V Three Phase
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 152

Description: (2) Fast Heat KSX10301SJ Conductor Series, Modular Temperature Controllers On Stand 240 V Three Phase

Category:

153 UNI-Dyn Auto Mini Dryer Model UDC - 100, Serial Number 121084.01-02-0494 460 V Three-Phase, 25 Kva, Duel 200 Pound Modular Hoppers
Sold at Eastern Bioplastics on 12/16/2016
Mount Crawford, VA

Lot Number: 153

Description: UNI-Dyn Auto Mini Dryer Model UDC - 100, Serial Number 121084.01-02-0494 460 V Three-Phase, 25 Kva, Duel 200 Pound Modular Hoppers

Category:

 
Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577