buy instagram followers
register Login

MedPlast, Inc. – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 2 closing every minute in numerical order.

For Example: Lots 1 and 2 will start to close at 1:00 PM, Lots 3 and 4 will start to close at 1:01 PM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
Two Lots Close Per Minute beginning on  Tuesday, August 21st 2018 at 1:00 PM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
Announcement
LOTS 1 TO 139 BUILDING 235

LOTS 200 TO 252 BUILDING 215

LOTS 300 TO 379 BUILDING 245

LOTS 401 TO 402 OFFSITE FACILITY EDGEWOOD AVE

LOTS 403 TO 518 BUILDING 255

1 2011 Wittmann Tepro Basic C 285 Temperature Controller, Type TPC4B4L0X_04_00, S/N MTCBASICC286F.F27USA, 480V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 1

Description: 2011 Wittmann Tepro Basic C 285 Temperature Controller, Type TPC4B4L0X_04_00, S/N MTCBASICC286F.F27USA, 480V, 3-Phase, 60Htz

Category:

2 2011 Wittmann Tepro Basic C 285 Temperature Controller, Type TPC4B4L0X_04_00, S/N TPU0000069, 230V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 2

Description: 2011 Wittmann Tepro Basic C 285 Temperature Controller, Type TPC4B4L0X_04_00, S/N TPU0000069, 230V, 3-Phase, 60Htz

Category:

3 Advantage Sentra Series Temperature Controller, Model SK-1035-21C1, 230V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 3

Description: Advantage Sentra Series Temperature Controller, Model SK-1035-21C1, 230V, 3-Phase, 60Htz

Category:

4 2004 Advantage Sentra Series Temperature Controller, Model SK-1035ZHE21D1, 230V, 3-Phase, 60Htz, S/N 88830
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 4

Description: 2004 Advantage Sentra Series Temperature Controller, Model SK-1035ZHE21D1, 230V, 3-Phase, 60Htz, S/N 88830

Category:

5 Sterlco Vision Series Temperature Controller, Model 4410A, 230V, 3-Phase, 60Htz, S/N 97D5641
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 5

Description: Sterlco Vision Series Temperature Controller, Model 4410A, 230V, 3-Phase, 60Htz, S/N 97D5641

Category:

6 Sterlco Vision Series Temperature Controller, Model 4410A, 230V, 3-Phase, 60Htz, S/N 97A5659
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 6

Description: Sterlco Vision Series Temperature Controller, Model 4410A, 230V, 3-Phase, 60Htz, S/N 97A5659

Category:

7 Sterlco Vision Series Temperature Controller, Model 4410A, 460V, 3-Phase, 60Htz, S/N 97A5656
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 7

Description: Sterlco Vision Series Temperature Controller, Model 4410A, 460V, 3-Phase, 60Htz, S/N 97A5656

Category:

8 Sterlco Vision Series Temperature Controller, Model 4410A, 460V, 3-Phase, 60Htz, S/N 97A5657
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 8

Description: Sterlco Vision Series Temperature Controller, Model 4410A, 460V, 3-Phase, 60Htz, S/N 97A5657

Category:

9 Aquatherm Thermalcare Model RA090804 Temperature Controller, S/N I69601109, 460V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 9

Description: Aquatherm Thermalcare Model RA090804 Temperature Controller, S/N I69601109, 460V, 3-Phase, 60Htz

Category:

10 Aquatherm Thermalcare Model RA090804 Temperature Controller, S/N I6916031009, 460V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 10

Description: Aquatherm Thermalcare Model RA090804 Temperature Controller, S/N I6916031009, 460V, 3-Phase, 60Htz

Category:

11 Sterlco Sterl-Tronic Model M9412-A Temperature Controller, 230V, 3-Phase, 60Htz, S/N 73053
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 11

Description: Sterlco Sterl-Tronic Model M9412-A Temperature Controller, 230V, 3-Phase, 60Htz, S/N 73053

Category:

12 4-Bank 8-Port Manifold Set
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 12

Description: 4-Bank 8-Port Manifold Set

Category:

13 (8) Angle Iron Safety Frames
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 13

Description: (8) Angle Iron Safety Frames

Category:

14 Lot of (5) Novatec Electronic Vacuum Loaders
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 14

Description: Lot of (5) Novatec Electronic Vacuum Loaders

Category:

15 Lot of (5) Novatec Electronic Vacuum Loaders
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 15

Description: Lot of (5) Novatec Electronic Vacuum Loaders

Category:

16 Lot of (2) Autoload Pneumatic Vacuum Load Systems
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 16

Description: Lot of (2) Autoload Pneumatic Vacuum Load Systems

Category:

17 Gammaflux Model E91A 6-Zone Hotrunner w/ (3) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0998-18645-02, 240V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 17

Description: Gammaflux Model E91A 6-Zone Hotrunner w/ (3) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0998-18645-02, 240V, 3-Phase, 60Htz

Category:

18 Gammaflux Model E91A 6-Zone Hotrunner w/ (6) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0998-18645-01, 240V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 18

Description: Gammaflux Model E91A 6-Zone Hotrunner w/ (6) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0998-18645-01, 240V, 3-Phase, 60Htz

Category:

19 Gammaflux Model E91A 6-Zone Hotrunner w/ (4) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0698-18464-01, 240V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 19

Description: Gammaflux Model E91A 6-Zone Hotrunner w/ (4) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0698-18464-01, 240V, 3-Phase, 60Htz

Category:

20 Gammaflux Model E91A 6-Zone Hotrunner w/ (6) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 1196-16810-01, 240V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 20

Description: Gammaflux Model E91A 6-Zone Hotrunner w/ (6) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 1196-16810-01, 240V, 3-Phase, 60Htz

Category:

21 Gammaflux Model E91A 6-Zone Hotrunner w/ (6) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0897-17551-02, 240V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 21

Description: Gammaflux Model E91A 6-Zone Hotrunner w/ (6) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0897-17551-02, 240V, 3-Phase, 60Htz

Category:

22 Gammaflux Model E91A 6-Zone Hotrunner w/ (6) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0897-17551-03, 240V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 22

Description: Gammaflux Model E91A 6-Zone Hotrunner w/ (6) Model 932 Temperature Control Units w/ Assoc. Rolling Stamp, S/N 0897-17551-03, 240V, 3-Phase, 60Htz

Category:

23 Gammaflux Model E92 12-Channel Hotrunner w/ (7) Model 932 Temperature Controller Units, S/N 0698-18466-01, 240V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 23

Description: Gammaflux Model E92 12-Channel Hotrunner w/ (7) Model 932 Temperature Controller Units, S/N 0698-18466-01, 240V, 3-Phase, 60Htz

Category:

24 Gammaflux Model E903A 3-Channel Hotrunner, S/N 0698-18466-01, 240V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 24

Description: Gammaflux Model E903A 3-Channel Hotrunner, S/N 0698-18466-01, 240V, 3-Phase, 60Htz

Category:

25 Husky/Gammaflux Model GLC2I-Pronto-A6 Non-Expandable 6-Zone Hotrunner, S/N 0704-24962-01, 400/230V, 3-Phase, 60Htz
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 25

Description: Husky/Gammaflux Model GLC2I-Pronto-A6 Non-Expandable 6-Zone Hotrunner, S/N 0704-24962-01, 400/230V, 3-Phase, 60Htz

Category:

26 Gammaflux Model L12G050D12S4PJ Non-Expandable 6-Zone Hotrunner, S/N 1110-32695-01, 240V, 3-Phase, 50/60Htz, w/ Assoc. Cart
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 26

Description: Gammaflux Model L12G050D12S4PJ Non-Expandable 6-Zone Hotrunner, S/N 1110-32695-01, 240V, 3-Phase, 50/60Htz, w/ Assoc. Cart

Category:

27 1997 Van Dorn Model 85-HT-5F 85 Ton Injection Molding Machine, Shot Size 5oz/142g, Screw Diameter 35 Inches, 22.8 x 20.4 Inch Platen, Distance Between Tie Bars 16 x 13.6 Inches , Minimum Mold Size 4 Inches, Maximum Daylight 28 Inches, 12 Inch Clamp Stroke, 3 Inch Ejector Stroke, 230/460V, 3PH, 60Hz, s/n 785 , Machine #33
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 27

Description: 1997 Van Dorn Model 85-HT-5F 85 Ton Injection Molding Machine, Shot Size 5oz/142g, Screw Diameter 35 Inches, 22.8 x 20.4 Inch Platen, Distance Between Tie Bars 16 x 13.6 Inches , Minimum Mold Size 4 Inches, Maximum Daylight 28 Inches, 12 Inch Clamp Stroke, 3 Inch Ejector Stroke, 230/460V, 3PH, 60Hz, s/n 785 , Machine #33

Category:

28 Star Automation Model NP-800FIII XYZ Axis Pick n Place Robot w/ Stec-FA2 Pendant Controls, Transformer, Please Note - This Was removed from Molder & Skidded for Shipping
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 28

Description: Star Automation Model NP-800FIII XYZ Axis Pick n Place Robot w/ Stec-FA2 Pendant Controls, Transformer, Please Note - This Was removed from Molder & Skidded for Shipping

Category:

29 1995 Demag Model 250-80 30 Ton Injection Molding Machine, Shot Size .8oz/23g, Screw Diameter 18 Inches, 16.1 x 16.1 Inch Platen, Distance Between Tie Bars 11 x 11 Inches , Minimum Mold Size 6.2 Inches, Maximum Daylight 18.6 Inches, 12 Inch Clamp Stroke, 4 Inch Ejector Stroke, 460V, 3PH, 60Hz, s/n 7111-0069 , Machine #22
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 29

Description: 1995 Demag Model 250-80 30 Ton Injection Molding Machine, Shot Size .8oz/23g, Screw Diameter 18 Inches, 16.1 x 16.1 Inch Platen, Distance Between Tie Bars 11 x 11 Inches , Minimum Mold Size 6.2 Inches, Maximum Daylight 18.6 Inches, 12 Inch Clamp Stroke, 4 Inch Ejector Stroke, 460V, 3PH, 60Hz, s/n 7111-0069 , Machine #22

Category:

30 1997 Demag Model 500-200 55 Ton Injection Molding Machine, Shot Size 2oz/57g, Screw Diameter 25 Inches, 20.5 x 20.5 Inch Platen, Distance Between Tie Bars 14x14 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 24.1 Inches, 16 Inch Clamp Stroke, 5 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 7141-0614 , Machine #31
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 30

Description: 1997 Demag Model 500-200 55 Ton Injection Molding Machine, Shot Size 2oz/57g, Screw Diameter 25 Inches, 20.5 x 20.5 Inch Platen, Distance Between Tie Bars 14x14 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 24.1 Inches, 16 Inch Clamp Stroke, 5 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 7141-0614 , Machine #31

Category:

31 1999 Nissei Model FN 3000 150 Ton Injection Molding Machine, Shot Size 8.5oz/241g, Screw Diameter 45 Inches, 27.6 x 27.6 Inch Platen, Distance Between Tie Bars 18.9 x 18.9 Inches , Minimum Mold Size? Inches, Maximum Daylight? Inches,? Inch Clamp Stroke,? Inch Ejector Stroke, V, 3PH, 60Hz, s/n S14U082 , Machine #37
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 31

Description: 1999 Nissei Model FN 3000 150 Ton Injection Molding Machine, Shot Size 8.5oz/241g, Screw Diameter 45 Inches, 27.6 x 27.6 Inch Platen, Distance Between Tie Bars 18.9 x 18.9 Inches , Minimum Mold Size? Inches, Maximum Daylight? Inches,? Inch Clamp Stroke,? Inch Ejector Stroke, V, 3PH, 60Hz, s/n S14U082 , Machine #37

Category:

32 Star Automation Model 80CYB XYZ Axis Pick n Place Robot, S/N CYB-0057 w/ Star Model Stec-FA1 Pendant Controller, Transformer, Interface
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 32

Description: Star Automation Model 80CYB XYZ Axis Pick n Place Robot, S/N CYB-0057 w/ Star Model Stec-FA1 Pendant Controller, Transformer, Interface

Category:

33 Star Automation Model 80CYB XYZ Axis Pick n Place Robot, S/N 80CYB-0124 w/ Star Model Stec-FA1 Pendant Controller, Transformer, Interface
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 33

Description: Star Automation Model 80CYB XYZ Axis Pick n Place Robot, S/N 80CYB-0124 w/ Star Model Stec-FA1 Pendant Controller, Transformer, Interface

Category:

34 Star Automation Model 8CY-800FB XY-Axis Pick n Place Controller w/ Assoc. Controls, Star STEC Model 30 Teach Pendant Controls, Please Note Robot Has Control Adjustment Issue, Please Inspect
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 34

Description: Star Automation Model 8CY-800FB XY-Axis Pick n Place Controller w/ Assoc. Controls, Star STEC Model 30 Teach Pendant Controls, Please Note Robot Has Control Adjustment Issue, Please Inspect

Category:

35 Star Automation Model 80CYB XYZ Axis Pick n Place Robot, S/N 80CYB-0124 w/ Star Model Stec-FA1 Pendant Controller, Transformer, Interface, Please Note Robot Is In Need of Repair, Please Inspect
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 35

Description: Star Automation Model 80CYB XYZ Axis Pick n Place Robot, S/N 80CYB-0124 w/ Star Model Stec-FA1 Pendant Controller, Transformer, Interface, Please Note Robot Is In Need of Repair, Please Inspect

Category:

36 1997 Nissei Model TH100R3S12VSB 110VR Ton Injection Molding Machine, Shot Size 5.3oz/150g, Screw Diameter 40 Inches, Rotating (1320mm Diameter) Inch Platen, Distance Between Tie Bars 17.1 x 17.1 Inches , Minimum Mold Size 11.87 Inches, Maximum Daylight 21.67 Inches, 10 Inch Clamp Stroke, 2 Inch Ejector Stroke, 230/460V, 3PH, 60Hz, s/n T10S006 , Machine #34, Please Note Novatec Drying Unit Sold Separately as Lot 36A
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 36

Description: 1997 Nissei Model TH100R3S12VSB 110VR Ton Injection Molding Machine, Shot Size 5.3oz/150g, Screw Diameter 40 Inches, Rotating (1320mm Diameter) Inch Platen, Distance Between Tie Bars 17.1 x 17.1 Inches , Minimum Mold Size 11.87 Inches, Maximum Daylight 21.67 Inches, 10 Inch Clamp Stroke, 2 Inch Ejector Stroke, 230/460V, 3PH, 60Hz, s/n T10S006 , Machine #34, Please Note Novatec Drying Unit Sold Separately as Lot 36A

Category:

36A Novatec Model MV-25S Material Drying System, S/N 10A1015-3774, 230V, Single Phase, 60Htz, Novatec Model MG-Hopper Approx. 100-Lb Cap. Material Drying Hopper w/ Vacuum Loader
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 36A

Description: Novatec Model MV-25S Material Drying System, S/N 10A1015-3774, 230V, Single Phase, 60Htz, Novatec Model MG-Hopper Approx. 100-Lb Cap. Material Drying Hopper w/ Vacuum Loader

Category:

36C Motan Model MDS1200 Central Drying System w/ (4) Motan Drying Hoppers: 3500 lbs, 1200 lbs, 800 lbs, 400 lbs; w/ Booster Heaters, (3) 7.5 HP and (2) 5 HP Motan Material Conveying Pumps, w/ Dust Collectors & VFDs; (8) Motan Receivers (200-400 lbs/hr); Motan Control Panel, and Metal Detectors/Separator Magnet; S/N 90000263, Maquire Blenders not included Please Note: Located at 245 Suffolk Ln, Gardner, MA 01440
Sold at MedPlast, Inc. on 8/21/2018
Gardner MA

Lot Number: 36C

Description: Motan Model MDS1200 Central Drying System w/ (4) Motan Drying Hoppers: 3500 lbs, 1200 lbs, 800 lbs, 400 lbs; w/ Booster Heaters, (3) 7.5 HP and (2) 5 HP Motan Material Conveying Pumps, w/ Dust Collectors & VFDs; (8) Motan Receivers (200-400 lbs/hr); Motan Control Panel, and Metal Detectors/Separator Magnet; S/N 90000263, Maquire Blenders not included Please Note: Located at 245 Suffolk Ln, Gardner, MA 01440

Category:

37 Advance Scale w/ Ricelake Weighing System Model 4X4HP-5K 5,000-Lb.2500kg Cap. 4' x 4' Platform Scale, S/N A10979
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 37

Description: Advance Scale w/ Ricelake Weighing System Model 4X4HP-5K 5,000-Lb.2500kg Cap. 4' x 4' Platform Scale, S/N A10979

Category:

38 Graymills Model PL-36-FBA Approx. 36" x 24" Handi-Kleen Series PL36 Parts Washer w/ Pump
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 38

Description: Graymills Model PL-36-FBA Approx. 36" x 24" Handi-Kleen Series PL36 Parts Washer w/ Pump

Category:

39 Approx. 48" x 48" Heavy Duty Mold Makers Work Bench
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 39

Description: Approx. 48" x 48" Heavy Duty Mold Makers Work Bench

Category:

40 8-Step 6' 4-Wheel Rollaround Staircase, 3-Step 30" Rollaround Staircase
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 40

Description: 8-Step 6' 4-Wheel Rollaround Staircase, 3-Step 30" Rollaround Staircase

Category:

41 1997 Nissei Model FN 1000 90 Ton Injection Molding Machine, Shot Size 5.3oz/150g, Screw Diameter 40 Inches, 21.5 x 21.5 Inch Platen, Distance Between Tie Bars 15.1 x 15.1 Inches , Minimum Mold Size 7.9 Inches, Maximum Daylight 26 Inches, 18.5 Inch Clamp Stroke, 3 Inch Ejector Stroke, 230/460V, 3PH, 60Hz, s/n S08R284 , Machine #4
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 41

Description: 1997 Nissei Model FN 1000 90 Ton Injection Molding Machine, Shot Size 5.3oz/150g, Screw Diameter 40 Inches, 21.5 x 21.5 Inch Platen, Distance Between Tie Bars 15.1 x 15.1 Inches , Minimum Mold Size 7.9 Inches, Maximum Daylight 26 Inches, 18.5 Inch Clamp Stroke, 3 Inch Ejector Stroke, 230/460V, 3PH, 60Hz, s/n S08R284 , Machine #4

Category:

42 1996 Arburg Model 220M-250-75 30 Ton Injection Molding Machine, Shot Size .5oz/14g, Screw Diameter 15 Inches, 13.6 x 13.6 Inch Platen, Distance Between Tie Bars 8.7 x 8.7 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 19 Inches, 13 Inch Clamp Stroke, 4 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 165818 , Machine #25 w/ Multronica Series Controls
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 42

Description: 1996 Arburg Model 220M-250-75 30 Ton Injection Molding Machine, Shot Size .5oz/14g, Screw Diameter 15 Inches, 13.6 x 13.6 Inch Platen, Distance Between Tie Bars 8.7 x 8.7 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 19 Inches, 13 Inch Clamp Stroke, 4 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 165818 , Machine #25 w/ Multronica Series Controls

Category:

43 Custom Fabricated 4-Wheel Rollaround Mold Placement Cart w/ Dayton Deep Cycle Battery & Overhead Jib Arm
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 43

Description: Custom Fabricated 4-Wheel Rollaround Mold Placement Cart w/ Dayton Deep Cycle Battery & Overhead Jib Arm

Category:

44 1994 Arburg Model 270H-250-75E 30 Ton Injection Molding Machine, Shot Size 1.1oz/32g, Screw Diameter 22 Inches, 15.8 x 15.8 Inch Platen, Distance Between Tie Bars 10.6 x 10.6 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 19 Inches, 13 Inch Clamp Stroke, 4 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 157428 , Machine #18
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 44

Description: 1994 Arburg Model 270H-250-75E 30 Ton Injection Molding Machine, Shot Size 1.1oz/32g, Screw Diameter 22 Inches, 15.8 x 15.8 Inch Platen, Distance Between Tie Bars 10.6 x 10.6 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 19 Inches, 13 Inch Clamp Stroke, 4 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 157428 , Machine #18

Category:

45 1996 Arburg Model 220M-250-75 30 Ton Injection Molding Machine, Shot Size .9oz/26g, Screw Diameter 20 Inches, 13.6 x 13.6 Inch Platen, Distance Between Tie Bars 8.7 x 8.7 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 19 Inches, 13 Inch Clamp Stroke, 4 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n b , Machine #26
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 45

Description: 1996 Arburg Model 220M-250-75 30 Ton Injection Molding Machine, Shot Size .9oz/26g, Screw Diameter 20 Inches, 13.6 x 13.6 Inch Platen, Distance Between Tie Bars 8.7 x 8.7 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 19 Inches, 13 Inch Clamp Stroke, 4 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n b , Machine #26

Category:

46 Approx. 10' L x 24" W Aluminum Work Platform w/ Aluminum Rails
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 46

Description: Approx. 10' L x 24" W Aluminum Work Platform w/ Aluminum Rails

Category:

47 1994 Arburg Model 270H-250-75E 30 Ton Injection Molding Machine, Shot Size 1.1oz/32g, Screw Diameter 22 Inches, 15.8 x 15.8 Inch Platen, Distance Between Tie Bars 10.6 x 10.6 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 19 Inches, 13 Inch Clamp Stroke, 4 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 157427 , Machine #17
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 47

Description: 1994 Arburg Model 270H-250-75E 30 Ton Injection Molding Machine, Shot Size 1.1oz/32g, Screw Diameter 22 Inches, 15.8 x 15.8 Inch Platen, Distance Between Tie Bars 10.6 x 10.6 Inches , Minimum Mold Size 8 Inches, Maximum Daylight 19 Inches, 13 Inch Clamp Stroke, 4 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 157427 , Machine #17

Category:

48 1994 Arburg Model 320M-500-210 55 Ton Injection Molding Machine, Shot Size 3.1oz/89g, Screw Diameter 30 Inches, 19.3 x 19.3 Inch Platen, Distance Between Tie Bars 12.6 x 12.6 Inches , Minimum Mold Size 10 Inches, Maximum Daylight 25 Inches, 15 Inch Clamp Stroke, 6 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 158606 , Machine #20
Sold at MedPlast, Inc. on 8/21/2018
West Berlin NJ

Lot Number: 48

Description: 1994 Arburg Model 320M-500-210 55 Ton Injection Molding Machine, Shot Size 3.1oz/89g, Screw Diameter 30 Inches, 19.3 x 19.3 Inch Platen, Distance Between Tie Bars 12.6 x 12.6 Inches , Minimum Mold Size 10 Inches, Maximum Daylight 25 Inches, 15 Inch Clamp Stroke, 6 Inch Ejector Stroke, 230V, 3PH, 60Hz, s/n 158606 , Machine #20

Category:

Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577