Reflek Corporation – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 1 closing every minute in numerical order.

For Example: Lot 1 will start to close at 10:00 AM, Lot 2 will start to close at 10:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
One Lot Close Per Minute beginning on  Tuesday, January 26th 2016 at 10:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $116.00 and a $100.00 purchase paying via credit card the total with BP is $119.00) 16% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 19% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
1 Miller Trailblazer 302 Gas Welder w/ 12 VS Wire Feeder, s/n LH45045Q, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 1

Description: Miller Trailblazer 302 Gas Welder w/ 12 VS Wire Feeder, s/n LH45045Q, Located in Massachusetts

Category:

4 Cincinnati Model 2M1 Vertical Milling Machine, 1,500 RPM, S/N 212V1Z-58, Lot Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 4

Description: Cincinnati Model 2M1 Vertical Milling Machine, 1,500 RPM, S/N 212V1Z-58, Lot Located in Massachusetts

Category:

5 LeBlond Engine Lathe, 38inch x 10inch CC w/ 32inch 4-Jaw Chuck, S/N 23025, Lot Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 5

Description: LeBlond Engine Lathe, 38inch x 10inch CC w/ 32inch 4-Jaw Chuck, S/N 23025, Lot Located in Massachusetts

Category:

7 First Model LC Vertical Milling Machine, 3 HP, 185 VS, S/N 82100216, Lot Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 7

Description: First Model LC Vertical Milling Machine, 3 HP, 185 VS, S/N 82100216, Lot Located in Massachusetts

Category:

9 Kaeser 50-HP Rotary Air Compressor, (not operating), Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 9

Description: Kaeser 50-HP Rotary Air Compressor, (not operating), Located in Massachusetts

Category:

10 Infra Pak Model ER3 Sidewind Pallet Stretch Wrapper, s/n T011L93J, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 10

Description: Infra Pak Model ER3 Sidewind Pallet Stretch Wrapper, s/n T011L93J, Located in Massachusetts

Category:

12 Federal Model #7 80 Ton OBI Punch Press, 8inch Stroke, 60 - 120 SPM, CW RF1818 LH Feed, CW5000 18P Uncoiler, s/n 17423 Scrap Chopper, s/n 7-823, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 12

Description: Federal Model #7 80 Ton OBI Punch Press, 8inch Stroke, 60 - 120 SPM, CW RF1818 LH Feed, CW5000 18P Uncoiler, s/n 17423 Scrap Chopper, s/n 7-823, Located in Massachusetts

Category:

13 Kaeser Model SK26 Rotary Screw Air Compressor, 20 HP, s/n n/a, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 13

Description: Kaeser Model SK26 Rotary Screw Air Compressor, 20 HP, s/n n/a, Located in Massachusetts

Category:

14 Cincinnati Model 15-10-7 Hydroform Press, 15inch Max Blank, 10000 PSI, 7inch Draw (Color Dark Green), s/n 66-300F-783-1, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 14

Description: Cincinnati Model 15-10-7 Hydroform Press, 15inch Max Blank, 10000 PSI, 7inch Draw (Color Dark Green), s/n 66-300F-783-1, Located in Massachusetts

Category:

15 Cincinnati Model 15-10-7 Hydroform Press, 15inch Max Blank, 10000 PSI, 7inch Draw (Color Light Green), s/n 65-300F-692-1, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 15

Description: Cincinnati Model 15-10-7 Hydroform Press, 15inch Max Blank, 10000 PSI, 7inch Draw (Color Light Green), s/n 65-300F-692-1, Located in Massachusetts

Category:

16 Cincinnati Model 15-10-7 Hydroform Press, 15inch Max Blank, 10000 PSI, 7inch Draw (Color Light Grey), s/n n/a, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 16

Description: Cincinnati Model 15-10-7 Hydroform Press, 15inch Max Blank, 10000 PSI, 7inch Draw (Color Light Grey), s/n n/a, Located in Massachusetts

Category:

17 Cincinnati Model 25-5-10 Hydroform Press, 25inch Max Blank, 5000 PSI, 10inch Draw, s/n 64-300-F-538-1 * lot # 17 & 18 are being sold as one lot (Located in Storage, Attleboro, MA)
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 17

Description: Cincinnati Model 25-5-10 Hydroform Press, 25inch Max Blank, 5000 PSI, 10inch Draw, s/n 64-300-F-538-1 * lot # 17 & 18 are being sold as one lot (Located in Storage, Attleboro, MA)

Category:

18 Cincinnati Model 25-5-10 Hydroform Press, 25inch Max Blank, 5000 PSI, 10inch Draw, s/n 63-300-F-484-1, * being sold as one lot with lot # 17 (Located in Storage, Attleboro, MA)
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 18

Description: Cincinnati Model 25-5-10 Hydroform Press, 25inch Max Blank, 5000 PSI, 10inch Draw, s/n 63-300-F-484-1, * being sold as one lot with lot # 17 (Located in Storage, Attleboro, MA)

Category:

19 Allis Chalmers LPG Forklift Truck, Solid Tires, 4000 Lbs, s/n 277532, Lot Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 19

Description: Allis Chalmers LPG Forklift Truck, Solid Tires, 4000 Lbs, s/n 277532, Lot Located in Massachusetts

Category:

20 The Hope Group Hydraulic Transfer Power Unit, 75 HP, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit #4, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 20

Description: The Hope Group Hydraulic Transfer Power Unit, 75 HP, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit #4, Located in Massachusetts

Category:

21 The Hope Group Hydraulic Transfer Power Unit, 75hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit #1, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 21

Description: The Hope Group Hydraulic Transfer Power Unit, 75hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit #1, Located in Massachusetts

Category:

22 The Hope Group Hydraulic Transfer Power Unit, 100hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit # 8, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 22

Description: The Hope Group Hydraulic Transfer Power Unit, 100hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit # 8, Located in Massachusetts

Category:

23 The Hope Group Hydraulic Transfer Power Unit, 100hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit #7, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 23

Description: The Hope Group Hydraulic Transfer Power Unit, 100hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit #7, Located in Massachusetts

Category:

24 The Hope Group Hydraulic Transfer Power, 75hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit # 2, (missing parts/pumps) Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 24

Description: The Hope Group Hydraulic Transfer Power, 75hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Unit # 2, (missing parts/pumps) Located in Massachusetts

Category:

25 The Hope Group Hydraulic Transfer Power Unit, 75hp,200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 25

Description: The Hope Group Hydraulic Transfer Power Unit, 75hp,200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Located in Massachusetts

Category:

26 The Hope Group Hydraulic Transfer Power Unit, 75hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Located in Massachusetts
Sold at Reflek Corporation on 1/26/2016
Fall River, MA

Lot Number: 26

Description: The Hope Group Hydraulic Transfer Power Unit, 75hp, 200 gallon reservoir, 2 pumps: medium pressure low volume and high pressure low volume, with air cooled heat exchanger. 480 v, Located in Massachusetts

Category:

75 Presto Hydraulic Stacker, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 75

Description: Presto Hydraulic Stacker, Located in Georgia

Category:

76 Wulftec Model WLP-150 Pallet Stretch Wrapper, s/n 17305-1-904, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 76

Description: Wulftec Model WLP-150 Pallet Stretch Wrapper, s/n 17305-1-904, Located in Georgia

Category:

77 Carrier Model 30RBB08064-5.3 Water Chiller, s/n 1310Q74049, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 77

Description: Carrier Model 30RBB08064-5.3 Water Chiller, s/n 1310Q74049, Located in Georgia

Category:

78 Guifil Model PE6-16 Press Brake, 24inch, 16-Ton Automec CNC99 Auto Gauge, s/n n/a, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 78

Description: Guifil Model PE6-16 Press Brake, 24inch, 16-Ton Automec CNC99 Auto Gauge, s/n n/a, Located in Georgia

Category:

79 Wysong Model MTH60 Press Brake, 60-Ton w/ CNC 99 Control, Model MTS-140, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 79

Description: Wysong Model MTH60 Press Brake, 60-Ton w/ CNC 99 Control, Model MTS-140, Located in Georgia

Category:

80 Haas Model VF-3 CNC Vertical Milling Center, 40inch x 20inch x 25inch 20-Station ATC (1006), Haas CNC Control, s/n 12866, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 80

Description: Haas Model VF-3 CNC Vertical Milling Center, 40inch x 20inch x 25inch 20-Station ATC (1006), Haas CNC Control, s/n 12866, Located in Georgia

Category:

81 Grizzly Down Draft Tables w/ Baldor 1inch Endless Belt Grinder, s/n n/a, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 81

Description: Grizzly Down Draft Tables w/ Baldor 1inch Endless Belt Grinder, s/n n/a, Located in Georgia

Category:

82 Grizzly Down Draft Tables w/ Baldor 1inch Endless Belt Grinder, s/n n/a, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 82

Description: Grizzly Down Draft Tables w/ Baldor 1inch Endless Belt Grinder, s/n n/a, Located in Georgia

Category:

84 Delta Model 17-965 Pedestal Drill Press, s/n n/a, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 84

Description: Delta Model 17-965 Pedestal Drill Press, s/n n/a, Located in Georgia

Category:

85 MSC Vertical Drill Press, Model V0685446, s/n 730395, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 85

Description: MSC Vertical Drill Press, Model V0685446, s/n 730395, Located in Georgia

Category:

86 Bridgeport Series I Vertical Milling Machine w/ Accu-Rite DRO, s/n n/a, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 86

Description: Bridgeport Series I Vertical Milling Machine w/ Accu-Rite DRO, s/n n/a, Located in Georgia

Category:

87 Clausing Model C250A Semi Automatic Horizontal Band Saw, s/n n/a, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 87

Description: Clausing Model C250A Semi Automatic Horizontal Band Saw, s/n n/a, Located in Georgia

Category:

88 Process Technology Fume Scrubber, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 88

Description: Process Technology Fume Scrubber, Located in Georgia

Category:

89 Hurst #1 100 HP Gas Fired Steam Process Boilers w/ Feed Miser Return Tank, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 89

Description: Hurst #1 100 HP Gas Fired Steam Process Boilers w/ Feed Miser Return Tank, Located in Georgia

Category:

90 Hurst #2 100 HP Gas Fired Steam Process Boilers w/ Feed Miser Return Tank, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 90

Description: Hurst #2 100 HP Gas Fired Steam Process Boilers w/ Feed Miser Return Tank, Located in Georgia

Category:

91 Trane Chiller, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 91

Description: Trane Chiller, Located in Georgia

Category:

92 Raymond Model EASI-R33T Stand Up Electric Narrow Aisle Forklift, 3300 Lb Capacity, Located in Georgia
Sold at Reflek Corporation on 1/26/2016
Lithia Springs, GA

Lot Number: 92

Description: Raymond Model EASI-R33T Stand Up Electric Narrow Aisle Forklift, 3300 Lb Capacity, Located in Georgia

Category:

200 Rigid Model Rigid 300 Pipe Threading machine on Stand w/ Cutting Dies and Oiling Bucket, Located in Tennessee
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 200

Description: Rigid Model Rigid 300 Pipe Threading machine on Stand w/ Cutting Dies and Oiling Bucket, Located in Tennessee

Category:

201 Sterlco Model M8422-GX Mold Water Temperature Unit, 3 HP, 60 GPM Dual Unit (Two Units in One), 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 201

Description: Sterlco Model M8422-GX Mold Water Temperature Unit, 3 HP, 60 GPM Dual Unit (Two Units in One), 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee

Category:

202 Sterlco Model M8422-GX Mold Water Temperature Unit, 3 HP, 60 GPM Dual Unit (Two Units in One), 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 202

Description: Sterlco Model M8422-GX Mold Water Temperature Unit, 3 HP, 60 GPM Dual Unit (Two Units in One), 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee

Category:

203 Sterlco Model M8422-GX Mold Water Temperature Unit, 3 HP, 60 GPM Dual Unit (Two Units in One), 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 203

Description: Sterlco Model M8422-GX Mold Water Temperature Unit, 3 HP, 60 GPM Dual Unit (Two Units in One), 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee

Category:

204 Sterlco Model M8422-GX Mold Water Temperature Unit, 3 HP, 60 GPM Dual Unit (Two Units in One), 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 204

Description: Sterlco Model M8422-GX Mold Water Temperature Unit, 3 HP, 60 GPM Dual Unit (Two Units in One), 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee

Category:

205 Application Engineering Corporation Model QTDW-1C Mold Water Temperature Unit, 2 HP, 50 GPM - 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 205

Description: Application Engineering Corporation Model QTDW-1C Mold Water Temperature Unit, 2 HP, 50 GPM - 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee

Category:

206 Application Engineering Corporation Model QTDW-1C Mold Water Temperature Unit, 2 HP, 50 GPM - 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 206

Description: Application Engineering Corporation Model QTDW-1C Mold Water Temperature Unit, 2 HP, 50 GPM - 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee

Category:

207 Application Engineering Corporation Model TDW-1 Mold Water Temperature Unit, 2 HP, 50 GPM - 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 207

Description: Application Engineering Corporation Model TDW-1 Mold Water Temperature Unit, 2 HP, 50 GPM - 12 KW Heaters, 480 VAC, 3 Ph, Located in Tennessee

Category:

208 Wisconsin Oven Corp Model Type SCS 3/45/1.5/E-5 Overhead Trolley Tunnel Oven, S/N 022478711, Max Temp 250 F, Electric Fired, 72 KW, Volt 480/3/60, Amp 98, 42"wide x 72" high x 42 ft long with 18 ft long flash off, 2-speed chain on edge conveying system, Has been raised 24" to allow for racks
Sold at Reflek Corporation on 1/26/2016
Dickson, TN

Lot Number: 208

Description: Wisconsin Oven Corp Model Type SCS 3/45/1.5/E-5 Overhead Trolley Tunnel Oven, S/N 022478711, Max Temp 250 F, Electric Fired, 72 KW, Volt 480/3/60, Amp 98, 42"wide x 72" high x 42 ft long with 18 ft long flash off, 2-speed chain on edge conveying system, Has been raised 24" to allow for racks

Category:

 
Copyright ©2011 Branford Auctions, LLC. Branford Valuations, LLC.       896 Main St., Branford, CT 06405       service@thebranfordgroup.com       phone: 203-488-7020        fax: 203-488-4577