SPX Flow – Lot Catalog

Lot Closings: Lot Closings: The Lots will have a staggered closing time with 1 closing every minute in numerical order.

For Example: Lot 1 will start to close at 11:00 AM, Lot 2 will start to close at 11:01 AM and so forth.  (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)

Lot closings also have an auto-extend feature.  A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
One Lot Close Per Minute beginning on  Tuesday, June 08th 2021 at 11:00 AM Eastern

The currency for this Auction is $ USD

Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $118.00 and a $100.00 purchase paying via credit card the total with BP is $121.00) 18% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 21% BP for any buyers paying via Credit Card.

  Lots Per Page:
Lot  Photo Description  Location 
1231 Startrite Model 316H Vertical Band Saw w/ Table Feed Controller, Blade Welder, Dual/Tri Wheel Saw Configuration, Max. Throat Depth 36"
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1231

Description: Startrite Model 316H Vertical Band Saw w/ Table Feed Controller, Blade Welder, Dual/Tri Wheel Saw Configuration, Max. Throat Depth 36"

Category:

1238 USI Clearing Model 60T-640-115 Punch Press, 60-Ton Cap., Strokes p/minute 90, Stroke of Slide: 1/4 - 4", Shut Height: 13-1/4", Adjustment Slide: 3", 480V, w/ Press Pilot - 150 Press Control
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1238

Description: USI Clearing Model 60T-640-115 Punch Press, 60-Ton Cap., Strokes p/minute 90, Stroke of Slide: 1/4 - 4", Shut Height: 13-1/4", Adjustment Slide: 3", 480V, w/ Press Pilot - 150 Press Control

Category:

1258 BMD 1500-Ton Hydraulic Press w/ Wickert Controller, Max. Opening Approx. 50", Bed 59" x 71"
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1258

Description: BMD 1500-Ton Hydraulic Press w/ Wickert Controller, Max. Opening Approx. 50", Bed 59" x 71"

Category:

1259 Canu Model SC-620/M Decoiler Unit, s/n 8652, Voltage 380, 50 Hz
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1259

Description: Canu Model SC-620/M Decoiler Unit, s/n 8652, Voltage 380, 50 Hz

Category:

1296 2016 Dalex Automatic Spot and Seam Welding Line, Runs In This Order: Infeed Zone, Spot Welding Station, Intermittent Conveyor, Seam Welding Stations, Cooling Station, Alignment Station, Brushing Statiion, Run Out Strip & Stacking Station, Adjustable Width, See Pictures w/ Safety Cages.
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1296

Description: 2016 Dalex Automatic Spot and Seam Welding Line, Runs In This Order: Infeed Zone, Spot Welding Station, Intermittent Conveyor, Seam Welding Stations, Cooling Station, Alignment Station, Brushing Statiion, Run Out Strip & Stacking Station, Adjustable Width, See Pictures w/ Safety Cages.

Category:

1301 Umbra Cuscinetti Spa Foligno Model 40 03143 Quick Mill CNC, Table Dims. 180" x 60", 480V, w/ 14-Position Cat 50 Tool Changer, Renishaw Wire Probe
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1301

Description: Umbra Cuscinetti Spa Foligno Model 40 03143 Quick Mill CNC, Table Dims. 180" x 60", 480V, w/ 14-Position Cat 50 Tool Changer, Renishaw Wire Probe

Category:

1303 Monarch Model VMC150B CNC Mill w/ Pallet Changer, GE Fanuc Series 16i-Mike Controller, Chip Conveyor, 30-Position Cat 50 Tool Changer, 460V, 3-Phase, Renishaw Tool Touchoff Sensor - Note Probe Not Incl, (4) Pallets Incl
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1303

Description: Monarch Model VMC150B CNC Mill w/ Pallet Changer, GE Fanuc Series 16i-Mike Controller, Chip Conveyor, 30-Position Cat 50 Tool Changer, 460V, 3-Phase, Renishaw Tool Touchoff Sensor - Note Probe Not Incl, (4) Pallets Incl

Category:

1305 Steel Safety Work Platform, Floor Dims: 69" w x 74" D, Floor Height 21"
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1305

Description: Steel Safety Work Platform, Floor Dims: 69" w x 74" D, Floor Height 21"

Category:

1312 Hedelius CNC Mill - Model CB 80, Cat 40 Tool Type, Table 114" x 29" w/ (2) Wagner Magnet Plates, Plate Dims 31" W x 24" D, Incl Coolant Pump, Chip Conveyor, 400V, Approx. (40) Cat 40 Tool Changer w/ Transformer Serial: 037273
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1312

Description: Hedelius CNC Mill - Model CB 80, Cat 40 Tool Type, Table 114" x 29" w/ (2) Wagner Magnet Plates, Plate Dims 31" W x 24" D, Incl Coolant Pump, Chip Conveyor, 400V, Approx. (40) Cat 40 Tool Changer w/ Transformer Serial: 037273

Category:

1333 Asquith Model 3PS Radial Drill, Machine # 27829, S/N 10167, Cap. 3" Dia. Drilling Steel, Iron 3-1 /2" Dia., Height Under Spindle Max. 4' 7", Min. 2' 3"; 415V, Table Dims. 33" W x 42" D, w/ 8" Machining Vise
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1333

Description: Asquith Model 3PS Radial Drill, Machine # 27829, S/N 10167, Cap. 3" Dia. Drilling Steel, Iron 3-1 /2" Dia., Height Under Spindle Max. 4' 7", Min. 2' 3"; 415V, Table Dims. 33" W x 42" D, w/ 8" Machining Vise

Category:

1367 Vetter Model 105040/1 Rotomax, 20000K Max. Cap., w/ Assorted Size Slings
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1367

Description: Vetter Model 105040/1 Rotomax, 20000K Max. Cap., w/ Assorted Size Slings

Category:

1368 Edwards Engineering Model CF-20-AHPD Chiller, R-22 Refrigerant, Charge 13-Lbs, Storage Tank 85-Gallons @ 35 PSI, 465-Phase, Max. Pressure 4000 PSI
Sold at SPX Flow on 6/8/2021
Goldsboro NC

Lot Number: 1368

Description: Edwards Engineering Model CF-20-AHPD Chiller, R-22 Refrigerant, Charge 13-Lbs, Storage Tank 85-Gallons @ 35 PSI, 465-Phase, Max. Pressure 4000 PSI

Category: