Tsugami Machine – Lot Catalog
Lot Closings:
Lot Closings: The Lots will have a staggered closing time with 1 closing every minute in numerical order.
For Example: Lot 1 will start to close at 11:00 AM,
Lot 2 will start to close at 11:01 AM and so forth. (On the day the auction is set to close, each lot will clearly countdown the time left until closing.)
Lot closings also have an auto-extend feature. A lot must not receive any bids within the last 5 minutes of its closing time for it to close. If a bid is placed within the last 5 minutes of a lot’s closing, the closing time for that lot will immediately be extended by 5 minutes.
One Lot Close Per Minute beginning on Friday, November 20th 2020 at 11:00 AM Eastern
The currency for this Auction is $ USD
Buyers Premium: (Example: a $100.00 purchase paying by cash instrument the total with BP is $118.00 and a $100.00 purchase paying via credit card the total with BP is $121.00) 18% BP for buyers paying via Cashiers Check, Company Check or Wire Transfer will apply to your purchase, or 21% BP for any buyers paying via Credit Card.
|
1
|
|
Tsugami SS20 Swiss Type CNC Lathe s/n 175 (Machine # 2) Equipped w/ Edge Technologies FMB Turbo 326 12' Magazine Bar Feeder, Year: 2008 (July), 20mm (.812" bar) Capacity, 6-Axis with (2) C Axis Fanuc 31i-A CNC Controller, 10,000 RPM Main & Sub Spindles, Fully Programmable Pick-Off Spindle, Three (3) Live Facing Positions for Back Spindle, Two (2) Cross Live Positions for Back Spindle, 8-Axes Simultaneous Control, Five (5) hp Front Spindle, Five (5) hp Back Spindle, 2060 IPM Rapids, 8.66" Z-Axis Stroke, Chucker Kit, Double Milling Unit Main Spindle Y241, Sub Spindle Part Ejection, Micron Specification 0.1, Coolant Through Sub Spindle (only Sub), SO8 2000 PSI 8-Port High Pressure Coolant System, Tri-Mist 850 Mist Collector with Hepa Filter, Turmoil Coolant Chiller, Fire Suppression System, 33,399 hr Run Time, 23,284 hr Cutting Time Exclusive Rigger: Gaudette Machinery Movers Inc.
401-725-2850 Price to load this machine including bar feeder is $1250. *this price applies to both machines being
loaded the same day.
Sold at Tsugami Machine on 11/20/2020
|
Cranston RI
|
Lot Number:
1
Description:
Tsugami SS20 Swiss Type CNC Lathe s/n 175 (Machine # 2) Equipped w/ Edge Technologies FMB Turbo 326 12' Magazine Bar Feeder, Year: 2008 (July), 20mm (.812" bar) Capacity, 6-Axis with (2) C Axis Fanuc 31i-A CNC Controller, 10,000 RPM Main & Sub Spindles, Fully Programmable Pick-Off Spindle, Three (3) Live Facing Positions for Back Spindle, Two (2) Cross Live Positions for Back Spindle, 8-Axes Simultaneous Control, Five (5) hp Front Spindle, Five (5) hp Back Spindle, 2060 IPM Rapids, 8.66" Z-Axis Stroke, Chucker Kit, Double Milling Unit Main Spindle Y241, Sub Spindle Part Ejection, Micron Specification 0.1, Coolant Through Sub Spindle (only Sub), SO8 2000 PSI 8-Port High Pressure Coolant System, Tri-Mist 850 Mist Collector with Hepa Filter, Turmoil Coolant Chiller, Fire Suppression System, 33,399 hr Run Time, 23,284 hr Cutting Time Exclusive Rigger: Gaudette Machinery Movers Inc.
401-725-2850 Price to load this machine including bar feeder is $1250. *this price applies to both machines being
loaded the same day.
Category:
|
|
2
|
|
Tsugami SS20 Swiss Type CNC Lathe s/n 160 (Machine # 1) Equipped w/ Edge Technologies FMB Turbo 326 12' Magazine Bar Feeder, Year: 2008 (July), 20mm (.812" bar) Capacity, 6-Axis with (2) C Axis Fanuc 31i-A CNC Controller, 10,000 RPM Main & Sub Spindles, Fully Programmable Pick-Off Spindle, Three (3) Live Facing Positions for Back Spindle, Two (2) Cross Live Positions for Back Spindle, 8-Axes Simultaneous Control, Five (5) hp Front Spindle, Five (5) hp Back Spindle, 2060 IPM Rapids, 8.66" Z-Axis Stroke, Chucker Kit, Double Milling Unit Main Spindle Y241, Sub Spindle Part Ejection, Micron Specification 0.1, Coolant Through Sub Spindle (only Sub) SO8 2000 PSI 8-Port High Pressure Coolant System, Tri-Mist 850 Mist Collector with Hepa Filter, Turmoil Coolant Chiller, Fire Suppression System, 32,932 hr Run Time, 22,974 hr Cutting Time Exclusive Rigger: Gaudette Machinery Movers Inc.
401-725-2850 Price to load this machine including bar feeder is $1250. *this price applies to both machines being
loaded the same day.
Sold at Tsugami Machine on 11/20/2020
|
Cranston RI
|
Lot Number:
2
Description:
Tsugami SS20 Swiss Type CNC Lathe s/n 160 (Machine # 1) Equipped w/ Edge Technologies FMB Turbo 326 12' Magazine Bar Feeder, Year: 2008 (July), 20mm (.812" bar) Capacity, 6-Axis with (2) C Axis Fanuc 31i-A CNC Controller, 10,000 RPM Main & Sub Spindles, Fully Programmable Pick-Off Spindle, Three (3) Live Facing Positions for Back Spindle, Two (2) Cross Live Positions for Back Spindle, 8-Axes Simultaneous Control, Five (5) hp Front Spindle, Five (5) hp Back Spindle, 2060 IPM Rapids, 8.66" Z-Axis Stroke, Chucker Kit, Double Milling Unit Main Spindle Y241, Sub Spindle Part Ejection, Micron Specification 0.1, Coolant Through Sub Spindle (only Sub) SO8 2000 PSI 8-Port High Pressure Coolant System, Tri-Mist 850 Mist Collector with Hepa Filter, Turmoil Coolant Chiller, Fire Suppression System, 32,932 hr Run Time, 22,974 hr Cutting Time Exclusive Rigger: Gaudette Machinery Movers Inc.
401-725-2850 Price to load this machine including bar feeder is $1250. *this price applies to both machines being
loaded the same day.
Category:
|